Philips DCR 9000 user manual Digital receiver and VCR or DVD recorder settings

Models: DCR 9000

1 64
Download 64 pages 42.2 Kb
Page 38
Image 38

- Incorporate your receiver in your existing installation as described below.

EN

Cable Wall socket

TV set

 

RF coaxial cable

EXT 1

EXT 2

Recorder

 

EXT 1

 

ANT IN

 

ANT OUT

 

EXT 2

 

 

 

 

 

 

Cable Receiver

-Connect the cable from the cable wall socket to the “RF IN” socket of your digital receiver.

Connect the “EXT1” SCART socket of your digital receiver to the EXT1 SCART socket of your TV using the SCART lead supplied with your digital receiver.

Connect the “EXT2” SCART socket of your digital receiver to the EXT2 SCART socket of your recorder (called “IN” or “DECODER”) using a SCART lead.

Connect the EXT1 SCART socket of your recorder (called “OUT”) to the “EXT2” SCART socket of your TV using a SCART lead.

-Plug all your equipment, excluding your digital receiver, into the mains.

-Read chapter 1 to proceed with the channel scan if not already done.

With this connection set up:

-You can watch digital TV while you record analogue TV.

-You can watch analogue TV while you record digital TV.

-You can record the digital TV channel you are watching.

Some VCR or DVD recorders need to be in standby to use the Easy recording or Record link feature. Refer to your VCR or DVD

recorder user manual.

14.3.2 Digital receiver and VCR or DVD recorder settings

- Depending on your VCR or DVD recorder brand and type, you have to set the recording control option to “Prepare Record” or “Record Link”. Refer to the VCR or DVD recorder user manual, or try the two options to find out which is most suitable.

- Set your VCR or DVD to “Prepare Record” or “Record Link” to allow control by your digital receiver.

14.3.3 Recording using the Video/DVD Recorder Control feature

- Your digital receiver,TV and VCR or DVD are connected and set according to paragraph 14.3.1.

-You have set a timer on your digital receiver.

-At timer start, your VCR or DVD recorder starts recording, and at timer end it stops recording under the control of your digital receiver.You no longer need VCR or DVD programming to record digital TV channels.

86

Page 38
Image 38
Philips DCR 9000 Digital receiver and VCR or DVD recorder settings, Recording using the Video/DVD Recorder Control feature