6Using your remote control when the STB mode is selected
EN
-Open info banner
-Then show extended programme information
-Then close banner
SELECT
Select the STB,TV,VCR, DVD, or AMP remote control mode
TEXT
In running mode: open/close teletext
RED, GREEN,YELLOW BLUE
Colour keys
OPT (yellow)
Open the option menu for selection in option channels or NVOD applications, audio, teletext, and subtitles
BACK
-Recall last channel while watching digital TV or listening to the radio
-Wake up the receiver from standby
EXIT
- Go back one step in the menu
Volume (1) 
+/-
Turn the volume of your Philips TV set up/down
Mute (1) 
Audio mute on your Philips TV set
P+/P-
-Select next/previous channel
-Wake up the receiver from
Audio selection
SUBTITLE
Subtitle selection
MENU
Open/Close menu
Switch between picture resolutions
Standby 
-Switch to
-Switch to Low Power (key press more than 2 seconds)
page up/down in lists
LIST
-Open current channel list
-Then switch between favourite lists
-Wake up the receiver from
EPG
Open/Close the Electronic Programme Guide (EPG)
CURSOR keys
t/y
Move selection up/down within menus and lists
u/ i
Select value for a setting
OK
-Call up current channel list while watching digital TV or listening to the radio
-Select/confirm in menu
-Select a channel in digital TV mode.
-Directly select a menu item
-Wake up the receiver from
TV/RADIO
-Toggle between digital TV and digital Radio
-Wake up the receiver from
(movie expand)
Control TV display format
TIMER
Set a recording timer from the EPG
Note: press TIMER then 0 to delete the active timer.
Switch between output sources (HDMI or DVI/YPbPr/SCART)
(1) If you have a TV set other than Philips, refer to paragraph 15.3 to change the brand setting of your remote control.
Infrared interference on external devices
To avoid bad remote control reception, place your external devices out of sight of the ambient lights of your TV set.
62
