Hobart HQC45, ML-124061 manual Cleaning, Condenser Coil, Maintenance Program

Page 12

MAINTENANCE

CLEANING

Wash, rinse, and sanitize the product probes before and after use as you would any food- contact utensil that measures temperature.

Chiller surfaces of stainless steel should be wiped clean with a damp cloth or mild cleaning solution. DO NOT flush with running water. Avoid the use of solvents around plastic or painted areas; clean these with a damp cloth moistened with a solution of mild detergent and warm water. Clean hinge hardware with a chrome cleaner. Use a solution of warm water and baking soda to clean the gasket; then wipe with a soft cloth. Hinges may require occasional lubrication of the plastic cam. Do not use the top of the chiller for storage.

CONDENSER COIL

Buzzer

Buzzer Loudness

Adjustment Screw

Fig. 5

Service Switch

PL-52202

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY BEFORE CLEANING ANY PARTS OF THE UNIT.

The lower front compressor cover is attached with Velcro. Pull to remove.

Check the condenser coil weekly. Air must be able to freely circulate through the condenser. This surface must be kept free of dirt and grease for proper system operation. Carefully clean dirt and lint from the condenser coil using a vacuum cleaner, whisk broom, or soft brush; do not use a wire brush. CAUTION: Do not damage the condenser coil fins. Replace lower front compressor cover. Reconnect electrical power supply.

EVAPORATOR COIL, CONDENSATE LOOP, AND CONDENSATE REMOVAL PAN

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY BEFORE CLEANING ANY PARTS OF THE UNIT.

When needed, these components can be flushed with fresh water by a qualified service technician. This should be part of any routine maintenance program and can prolong the life of the equipment.

Condensate removal is provided at the lower right portion of the equipment cabinet and does not need a drain. Periodic cleaning of the condensate removal pan (Fig. 6) may be needed. To access the condensate removal pan, remove the lower front compressor cover which is attached with Velcro. Pull to remove. Clean the condensate removal pan by wiping with a clean damp cloth or sponge, using care with the condensate loop inside. Replace compressor cover. Reconnect electrical power supply.

MAINTENANCE PROGRAM

CONDENSER COIL

EVAPORATOR

CONDENSATE LOOP

Fig. 6

PL-41383-1

For additional information or to discuss a maintenance program, contact your local Hobart authorized refrigeration service company.

FORM 34523 (July 2000)

– 12 –

PRINTED IN U.S.A.

Page 11 Page 12
Image 12
Page 11 Page 12
Contents Model Table of Contents General Installation UncratingLegs or Casters Features LocationInstallation of Remote Alarm Optional Installation CheckoutElectrical Connections Electrical DataChill Mode From the main menu, press OperationMain Menu Manual Chill Timed chill cycle. From the main menu, press 1 Freeze Mode From the main menu, press 2, when available Defrost Mode From the main menu, pressHold Mode From the main menu, press SET UP Mode From the main menu, press Setting for target food temperature in Chill mode is shownSetting the Time and Date Printer PaperLoading Printer Paper Maintenance CleaningMaintenance Program Condenser Coil

ML-124061, HQC45 specifications

The Hobart HQC45, designated as ML-124061, is a high-performance commercial food mixer designed to meet the demands of modern culinary establishments. Known for its robust construction and exceptional mixing capabilities, the HQC45 is a reliable choice for both small kitchens and larger food production environments.

One of the standout features of the Hobart HQC45 is its powerful motor, which delivers consistent performance across a variety of mixing tasks. The mixer boasts a 45-quart capacity, making it ideal for mixing large batches of dough, batters, and other ingredients. The size allows operators to efficiently prepare a diverse range of food items, enhancing productivity in any professional kitchen.

The HQC45 is equipped with a heavy-duty stainless steel bowl that is not only durable but also easy to clean, ensuring compliance with health and safety regulations. The bowl supports a variety of attachments, which can easily be swapped out to accommodate different mixing needs. The mixer supports a wide array of accessories, including dough hooks, wire whips, and flat beater attachments, making it versatile enough to handle tasks ranging from kneading bread dough to whipping cream.

With a focus on user convenience, the Hobart HQC45 features intuitive controls that allow for easy operation. It includes multiple speed settings, enabling chefs to select the appropriate mixing speed for the task at hand. This feature enhances the mixer’s capability, allowing for gentle mixing or vigorous beating while maintaining precision and consistency.

Additionally, the HQC45 integrates advanced safety features, including a safety interlock that prevents operation when the bowl or mixing attachments are not properly locked in place. This measure ensures operator safety and reduces the risk of accidents in busy kitchen environments.

The design of the Hobart HQC45 also emphasizes ease of use and maintenance. Its compact footprint allows for flexibility in kitchen layout, while the detachable bowl and attachments simplify cleaning processes. The model is built to withstand the rigors of daily use in a commercial setting, ensuring longevity and performance.

Overall, the Hobart HQC45 (ML-124061) stands out as a top choice for culinary professionals seeking a powerful, reliable, and versatile mixer that enhances efficiency and productivity in the kitchen. Its combination of robust construction, user-friendly features, and safety functionality make it an indispensable tool for food preparation.
Top Page Image Contents