Hobart HQC45 manual Electrical Connections, Electrical Data, Installation of Remote Alarm Optional

Page 6

ELECTRICAL CONNECTIONS

Line voltage supplied to the cabinet junction box must not be affected by the operation of other electrical equipment. Junction box is located at the rear of the lower section. The rear compressor cover is maintained in place with Velcro. Pull to remove it.

WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT.

The circuit should be protected with a Dual Element Time-Delay Fuse or Inverse Time Circuit Breaker.

ELECTRICAL DATA

 

 

Minimum Circuit Ampacity

Model

Volts / Hertz / Phase

Maximum Protective Device

 

 

AMPS

 

 

 

HQC45

208 / 60 / 1

15

 

 

HQCF45

240 / 60 / 1

15

 

 

 

 

 

208 / 60 / 1

20

 

 

 

HQC90

240 / 60 / 1

20

 

 

208 / 60 / 3

15

 

 

 

 

 

240 / 60 / 3

15

 

 

 

Compiled in accordance with the National Electrical Code, NFPA 70, latest edition.

INSTALLATION OF REMOTE ALARM (Optional)

The chiller provides a connection for a remote alarm that operates when the buzzer sounds on completion of a chill cycle. Connect to terminals on terminal block (# 5 and # 6 in the upper section of the chiller) per the wiring diagram and these restrictions:

1.Maximum remote alarm rating: 120V - 240V at 2 amps resistive or 100 watt incandescent lamp.

2.Connection must be made of 600 volt insulated wire suitable for supply voltage. Do not use bell wire, lamp cord or similar type wire.

INSTALLATION CHECKOUT

The self-contained refrigeration system (when equipped) is shipped fully charged with refrigerant and requires only proper electrical connections. Remote refrigeration systems must be installed, connected, and charged by others.

After proper electrical connections are made, place the switch next to the control in the On position.

– 6 –

Image 6
Contents Model Table of Contents General Installation UncratingLegs or Casters Features LocationElectrical Connections Installation of Remote Alarm OptionalInstallation Checkout Electrical DataChill Mode From the main menu, press OperationMain Menu Manual Chill Timed chill cycle. From the main menu, press 1 Freeze Mode From the main menu, press 2, when available Defrost Mode From the main menu, pressHold Mode From the main menu, press SET UP Mode From the main menu, press Setting for target food temperature in Chill mode is shownSetting the Time and Date Printer PaperLoading Printer Paper Maintenance Program MaintenanceCleaning Condenser Coil

ML-124061, HQC45 specifications

The Hobart HQC45, designated as ML-124061, is a high-performance commercial food mixer designed to meet the demands of modern culinary establishments. Known for its robust construction and exceptional mixing capabilities, the HQC45 is a reliable choice for both small kitchens and larger food production environments.

One of the standout features of the Hobart HQC45 is its powerful motor, which delivers consistent performance across a variety of mixing tasks. The mixer boasts a 45-quart capacity, making it ideal for mixing large batches of dough, batters, and other ingredients. The size allows operators to efficiently prepare a diverse range of food items, enhancing productivity in any professional kitchen.

The HQC45 is equipped with a heavy-duty stainless steel bowl that is not only durable but also easy to clean, ensuring compliance with health and safety regulations. The bowl supports a variety of attachments, which can easily be swapped out to accommodate different mixing needs. The mixer supports a wide array of accessories, including dough hooks, wire whips, and flat beater attachments, making it versatile enough to handle tasks ranging from kneading bread dough to whipping cream.

With a focus on user convenience, the Hobart HQC45 features intuitive controls that allow for easy operation. It includes multiple speed settings, enabling chefs to select the appropriate mixing speed for the task at hand. This feature enhances the mixer’s capability, allowing for gentle mixing or vigorous beating while maintaining precision and consistency.

Additionally, the HQC45 integrates advanced safety features, including a safety interlock that prevents operation when the bowl or mixing attachments are not properly locked in place. This measure ensures operator safety and reduces the risk of accidents in busy kitchen environments.

The design of the Hobart HQC45 also emphasizes ease of use and maintenance. Its compact footprint allows for flexibility in kitchen layout, while the detachable bowl and attachments simplify cleaning processes. The model is built to withstand the rigors of daily use in a commercial setting, ensuring longevity and performance.

Overall, the Hobart HQC45 (ML-124061) stands out as a top choice for culinary professionals seeking a powerful, reliable, and versatile mixer that enhances efficiency and productivity in the kitchen. Its combination of robust construction, user-friendly features, and safety functionality make it an indispensable tool for food preparation.