Hobart FP400 manual Troubleshooting Contd

Page 16

TROUBLESHOOTING (Cont'd.)

SYMPTOM	POSSIBLE CAUSE	SUGGESTED ACTION

Cutting tool locked to shaft.	Build-up between cutting tool and	Always use the ejector plate. Use
	dicing grid or potato chip grid.	a thick leather glove and carefully
		rotate cutting tool clockwise.

Decoring screw or agitator device	Devices have tightened during use	Use the wrench provided to
cannot be removed.	of the machine.	unscrew devices (left-hand thread).

FORM 33966 Rev. A (11-98)

– 16 –

PRINTED IN U.S.A.

Image 16

Contents Truct ONS Table of Contents Model FP400 Food Processor Shown with Feed Hopper AttachmentInstallation UnpackingLocation LevelingSTART-UP Testing Verify Correct RotationOperation Controls FigSlicing, Shredding, Grating, and Julienne Cutting Installing the Cutting ToolsDicing and French Fries Installing and Removing the Feed Cylinder Fig Removing the Cutting ToolsInstalling and Removing the Feed Attachments Feed Hopper Attachment Locking Knob Using the Food Processor SlicersJulienne Cutters Crimping SlicerGraters and Shredders Cleaning Replacement Dicing Grids MaintenanceService Troubleshooting Symptom Possible Cause Suggested ActionTroubleshooting Contd