Hobart FP400 manual Table of Contents

Page 2

TABLE OF CONTENTS
MODEL FP400 FOOD PROCESSOR	3
GENERAL	4
INSTALLATION	4
Unpacking	4
Location	4
Leveling	4
Electrical Connection	4
Verify Correct Location	5
Start-Up Testing	5
OPERATION	6
Controls	6
Installing the Cutting Tools	7
Removing the Cutting Tools	8
Installing and Removing the Feed Cylinder	8
Installing and Removing the Feed Attachments	9
Using the Food Processor	11
Cutting Tool Guide	11
Cleaning	13
MAINTENANCE	14
Replacement Dicing Grids	14
Service	14
TROUBLESHOOTING	15

– 2 –

Image 2

Contents Truct ONS Table of Contents Model FP400 Food Processor Shown with Feed Hopper AttachmentLocation InstallationUnpacking LevelingSTART-UP Testing Verify Correct RotationOperation Controls FigDicing and French Fries Installing the Cutting ToolsSlicing, Shredding, Grating, and Julienne Cutting Installing and Removing the Feed Cylinder Fig Removing the Cutting ToolsInstalling and Removing the Feed Attachments Feed Hopper Attachment Locking Knob Using the Food Processor SlicersGraters and Shredders Crimping SlicerJulienne Cutters Cleaning Service MaintenanceReplacement Dicing Grids Troubleshooting Symptom Possible Cause Suggested ActionTroubleshooting Contd