Frymaster YPF95 operation manual Unit Operation

Page 15

YPF95 SERIES PORTABLE FILTRATION SYSTEMS

CHAPTER 4: FILTER OPERATION

4.4Changing Filter Paper (cont.)

4.Remove and check the Sana Grid for cleanliness and clean if necessary.

5.Check the filter-pan for cleanliness and clean if necessary; check the drain ports at the bottom rear of the filter pan and clear any solidified shortening from the opening (black arrow).

6.Replace the Sana Grid and place a new sheet of filter paper on top of the screen.

7.Replace the hold-down ring in the filter pan on top of the filter paper.

8.Measure 8 ounces of filter powder and distribute evenly over the surface of the paper.

9.Replace the filter pan covers and slide it back into place between the appropriate fryers. Plug in the filter. It is now ready for operation.

Filter assembly.

4.5 Unit Operation

When filtering, follow these steps:

1.Follow the appropriate instructions in Sections 4.3 and 4.4 to prepare the filter unit for operation.

2.Position the oil baffle over the drain pipes extending from the side of each fryer. It should sit on the hold down ring in the bottom of the filter pan.

3.Turn the fryer main power switch to the "OFF" position.

4-3

Page 14 Page 16
Image 15
Page 14 Page 16
Contents `8196325~ Electrical Grounding Instructions Page Table of Contents Parts Ordering/Service Information Service InformationYPF95 Series Portable Filtration Systems Introduction After Purchase Safety InformationQualified and/or Authorized Operating Personnel Service Personnel DefinitionsYPF95 GeneralRating Plate Unpacking the Filter System Pre-InstallationAssembling The Filter System YPF95 Series Portable Filtration Systems Filter Preparation YPF95 Series Portable Filtration Systems Filter Operation Filtering Tools Filter PreparationChanging Filter Paper Unit Operation Filtering Each Filter Use Weekly Daily Close Of BusinessYPF95 Series Portable Filtration Systems Troubleshooting Operating ProblemsGeneral Troubleshooting YPF95 Series Portable Filtration Systems Troubleshooting 1 YPF95 120V Wiring Wiring DiagramsMain Components YPF95 Series Portable Filtration Systems Parts ListYPF95 Series Portable Filtration Systems Parts List Main Components This page Intentionally Left Blank Service Hotline

YPF95 specifications

The Frymaster YPF95 is a high-performance deep fryer designed specifically for commercial kitchens that require exceptional frying capabilities while ensuring safety, efficiency, and ease of use. This unit is equipped with advanced technology and features that make it a favorite among chefs and restaurant operators.

One of the standout characteristics of the Frymaster YPF95 is its high-efficiency heating system. The fryer operates with an incredible thermal efficiency, reducing energy consumption while providing consistent frying temperatures. This not only enhances the quality of fried food but can also lead to significant savings on energy bills, an essential factor for any busy kitchen.

The YPF95 comes with a large 50-pound oil capacity, making it ideal for high-volume frying operations. Its spacious frying vat allows for the frying of large batches of food, which can significantly streamline kitchen workflow during peak hours. Additionally, the fryer is designed with versatility in mind, suitable for frying a wide range of food items from french fries to chicken wings, ensuring that any restaurant’s menu can be reliably serviced.

Safety features are paramount in the design of the Frymaster YPF95. It incorporates a built-in filtration system that removes impurities from the oil, prolonging its life and ensuring that meals are cooked in clean, fresh oil. This system not only maintains food quality but also reduces the risk of oil-related accidents, promoting a safer kitchen environment.

Another key technology integrated into the YPF95 is its programmable controls. The fryer is equipped with a digital control system that allows users to set precise cooking times and temperatures. This feature ensures consistency in cooking and can be a valuable addition for establishments that are training new staff, as it simplifies the frying process.

Moreover, the Frymaster YPF95 is designed with ease of maintenance in mind. The removable oil drain valve and easy-access filtration system facilitate efficient cleaning and oil replacement procedures. This user-friendly design minimizes downtime and helps maintain optimal cooking conditions.

In summary, the Frymaster YPF95 is a robust and efficient fryer capable of meeting the rigorous demands of the foodservice industry. Its combination of high-capacity volume, safety features, and advanced technology makes it a wise investment for any commercial kitchen looking to enhance productivity while delivering top-quality fried foods.
Top Page Image Contents