Xantech MX88 installation instructions Zone Status Active-Operational Mode

Model MX88 Page: 11

Zone Status (Active-Operational Mode)

a)Steady White – indicates that the Zone is Active (Keypad ON), is not muted and is not within 5 dB of MAX-V (Maximum Volume).

b)Steady Red – indicates that the Zone is Active, is not muted and is within 5 dB of MAX-V.

c)Slow White Blink – indicates that the Zone is in the Active, is muted and is not within 5 dB of MAX-V.

d)Slow Red Blink – indicates that the Zone is Active, is muted and is within 5 dB of MAX-V.

e)Fast White Blink – indicates that Zone is Active, is being Ramped Up or Down and is not within 5 dB of MAX-V.

f)Fast Red Blink – indicates that the Zone is Active, is being Ramped Up or Down and is within 5 dB of MAX-V.

f)Off to indicate that Zone is in Not Active (Keypad OFF).

5.Front Panel Access Door. Push gently on lower half of door to open. Allows access to programming connections, Level Reset and Front Panel Source 8 A/V Input.

6.Level Reset. Pressing this button twice within 1 second restores all of the Factory Default Settings for all zones. The Factory Defaults are as follows:

∙ Mute Off

∙ Treble and Bass Flat ∙ Balance Centered

∙ Z-Adjust Treble and Bass Flat ∙ Z-Adjust Balance Centered

∙ Z-Adjust Max-V Cleared

∙ Z-Adjust Max-On-V Cleared ∙ Trim Levels Cleared

∙ IR Code Group set to A8

NOTE: The MX88 will always return to last set values (plus any unaltered factory defaults) after main power shut down or after any power interruptions.

7.IR Learning Eye. The IR Eye on the MX88 Controller front panel allows teaching IR Codes to Dragon Drop-IR™ via the Control Amp when connected to a PC „s com port.

8.RS232 Com Port. DB9 Connector. Used to program the MX88 Controller or perform firmware updates from a PC, using the Xantech Universal Dragon Software.

9.PROTECT On/Off Switch. Selects between Programming Mode (OFF position) and PROTECT (ON) position to keep program secure in memory.

10.STATUS A Led. Green Activity LED, lights during Program Download from Universal Dragon Software, during IR Learning and for firmware updates when using the RS232 Port located on the front panel

11.USB Com Port. Used to program the MX88 Controller or perform firmware updates from a PC, using the Xantech Universal Dragon Software.

12.STATUS B Led. Green Activity LED, lights during Program Download from Universal Dragon Software, during IR Learning and for firmware updates when using the USB Port located on the front panel.

13.Source 8 AUDIO IN L/R. Front panel Source 8 line level audio input. Gold-plated RCA Jacks for use with any desired A/V source component such as camcorder, video game console, or other.

14.Source 8 VIDEO IN (MX88vi only). Front panel Source 8 composite video input. Gold-plated RCA Jacks for use with any desired A/V source component such as camcorder, video game console, or other.

15.Source 8 Front/Rear Selector Switch. Selects whether the Source 8 Audio/Video inputs will come from the Front (F) or Rear (R) panel jacks.

© 2010 Xantech LLC