Maintenance

Lift-off oven door

The oven door may be removed to improve oven access during cleaning

Grasp the open door on both sides near the hinges

Flip the retainer clasps up and over the hook on the upper hinge arm. Maintain upward pressure on the door to prevent the clasps from disengaging

Lift the door upwards and outwards until it is free of the hinge housing

After cleaning, refit the door

in reverse order.

Removing the inner door glass.

•The glass may be removed for cleaning purposes by removing the two screws which hold it in place.

•It is now possible to clean the inside of the outer glass if required.

•Wash the glass in hot soapy water, rinse and dry.

•Re-assemble by carefully locating the rubber seal in the embossed groove before fitting the glass. The glass is marked “THIS SIDE TOWARDS OVEN”.

•Re-fit the two securing screws.

Removing the side racks and shelves

•The side racks and shelves may be removed for cleaning purposes.

•Slide the shelf out fully against the shelf stop.

•Lift the shelf slightly and slide it out

•The side racks may be removed by pulling the bottom stay slightly downwards thereby dislodging it from the retainer at the bottom centre. Lift the racks free of the retaining slots in the oven wall.

•Replace in reverse order of disassembly.