Defy Appliances 600 EMSG owner manual Condition Action Comments

CONDITION	ACTION	NOTES AND
		COMMENTS
Requires routine cleaning	Mild detergent solution	If possible use warm to
	applied with soft sponge or	hand-hot water. A 5%
	cloth. Rinse and wipe dry.	addition of ammonia is
		beneficial.
Finger prints	Pre-treat finger marks with	Minimize re-occurrence by
	alcohol or an organic solvent.	applying a wax or silicone
	Follow immediately with	based household polish to
	routine cleaning.	the clean dry surface.
	Wipe with a little baby oil and	Apply whenever necessary.
	a soft lint free cloth.
	Buff to shine.
Stubborn stains and	Use a little Ceran cleaning	Repeat several times rather
discolouration	paste. (available from Defy	than resorting to a single
	Service Centres).	aggressive cleaning method.
	Rinse and dry.
Grease and fat splatter.	Wipe off excess with a soft
	cloth or paper towel. Use a
	water borne degreasing agent
	(dishwashing liquid). Follow
	up by routine cleaning.
Scratches on the brushed	For slight scratches, use a	Deep scratches will be
finish.	nylon pad loaded with an iron	difficult to remove
	free abrasive polishing	completely. Do not use steel
	compound. Follow the	wool or metal scourers
	direction of the original	unless they are made from
	texture. Follow up with	stainless steel.
	routine cleaning.
	For deep scratches use a
	coarser abrasive initially and
	follow up as for light
	scratches.

It must be appreciated that some of the above suggested procedures will alter the surface appearance of the treated area.

They should therefore only be applied with due consideration and care.