Zephyr 700 manual Physical, Electrical, Operating

Page 5

Zephyrus 700 SCPC Satellite Receiver

 

Specifications and Typical Operating Criteria

PHYSICAL:

 

General:

Front panel is sloped back for easy viewing and data entry.

 

Analog meters for signal values. Keypad entry tuning. Illuminated

 

LCD readout of frequencies and operating status. Audio level

 

controls on front panel.

No. of carriers:

One basic with front panel devices included for optional second

 

channel.

Weight:

7½ pounds

Size:

3½" high, 11½" deep, 16¾" wide (19" with rack ears)

Operating range:

4° - 38° C, non-condensing

ELECTRICAL:

 

Input Power

105-125 VAC, 60 Hz, <30 watts (240 VAC 50Hz available)

Power to LNB

18 VDC, electronically shut down when shorted

OPERATING:

 

Satellite Freq.

3700-4200 MHz or 11700-12200 (to match tuning logic)

 

Other frequencies available

LNB frequency

950-1450 MHz

Input signal level

-40 dbm max to -85 dbm min typical

SCPC frequencies

50-90 MHz

RF bandwidth

70 kHz for 7.5 kHz audio, 140 kHz for 15 kHz audio

Audio Bandwidth

50 - 15,000 Hz or 50 - 7,500 Hz, per order

Freq. response

within ±1 dB over operating range

Companding

2:1 or 3:1, per order

Noise Floor

-70 db (2:1), -90db (3:1) typical

Distortion

<1% @ 1 kHz

Output

+18 dBm max balanced (level meters internally adjustable)

ZEPHYRUS ELECTRONICS, LTD

168 South 122nd East Avenue, Tulsa, Oklahoma 74128-2405 USA

918-437-3333 Fax 918-438-7322

MA700SPC.SAM

SECTION 1, PAGE 2

Image 5
Contents Series Scpc Thank you for using our equipment. We will do our best to Operating the Zephyrus 700 Series Scpc Satellite Receiver Operating the Zephyrus 700 Series Scpc Satellite Receiver Operating PhysicalElectrical Front Panel Operation Lnbs FaultLnbo Installation of the 700 Receiver system Back Indoors System Operation and Customization System Operation MA700SYS.SAM Channel 1 Receiver Board Receiver Back Panel