j BURNERH_O
The surface burner heads are removable for _D_E_,_
cleaning. The caps are porcelain, while the port ,G_,TE. _" O_E,T areas are aluminum. Wash the surface burner
heads in the sink with mild detergent and a plastic scrubber.
Note: For stubborn stains, clean with Cooktop Cleaning Creme (Part No, 20000001).
When replacing the burner heads, carefully align the detent on the head with the indentation in the burner base.
Note: Check to be sure all ports are open. To open clogged ports, insert a toothpick directly into each port.
Note: When burner heads are removed for cleaning, be careful not to spill liquids through the holes in the burner bases.
The aluminum surface burner bases are not removable. Clean with a damp cloth. Note: Be careful not to spill liquids through the holes in the burner bases.
Never wipe a warm or hot porcelain enamel surface with a damp cloth. For general daily cleaning and light soil, wash with warm soapy water, rinse, and dry. To remove grease spatters, spray with cleaners such as Fantastik or 409. DO NOT use abrasive or caustic cleaning agents which may permanently damage the finish. Note: For stubborn stains clean with Cooktop Cleaning Creme (Part No. 20000001).
NOTE: The porcelain enamel used on your cooktop is acid resistant, not acid proof. Therefore, acid foods (such as vinegar, tomato, milk, etc.) spilled on the cooktop should be wiped up immediately with a dry cloth.
If the igniters get dirty or greasy, clean with a toothbrush and warm soapy water. Rinse and dry thoroughly. DO NOT STRIKE or PRY the ceramic igniter.
14