Jenn-Air JGC1430 & JGC1536 installation manual Wall Oven Installed below 30″ Cooktop

Page 5

2.IF THIS UNIT WILL HAVE A JENN--AIR MODEL WALL OVEN INSTALLED BELOW THIS COOKTOP.

NOTE 1: This appliance and its gas and electrical supply sources must be installed before the wall oven is installed. See illustration (Electrical Wiring Information -- page 7; figure 6) for recommended electrical supply source locations.

NOTE 2: It may be necessary to extend gas supply piping for this appliance into adjacent under-counter cabinetry when a wall oven is installed below this appliance.

Join a 3/8″ NPT pipe elbow (locally available) to the male threads at the manifold entrance. When joined, ensure open threads of the elbow face toward the right side of the appliance. Install the appliance in its counter cutout.

Join a 3/8″ NPT pipe nipple to the elbow using a pipe section of sufficient length to extend, horizontally, beyond the right side of the wall oven. (To accomplish this it may be necessary to extend the pipe section into adjacent cabinetry.) Join additional 3/8″ NPT elbow(s) and pipe nipples, as necessary, to accomplish the following:

Join the outlet of the appliance pressure regulator supplied with this appliance to the male threads of the newly installed gas supply piping. Install the appliance regulator in a location which will be accessible beside or below the wall oven. Insure the appliance regulator is installed with its directional arrow pointing in the direction of gas flow. Tighten the appliance regulator to 20 to 30 ft-lbs of torque.

ILLUSTRATIVE GAS SUPPLY PIPING

(WALL OVEN INSTALLED BELOW 30″ COOKTOP)

(3/8″ N.P.T.)

ALL UNIT SIDE

 

ALL SUPPLY SIDE

PIPE JOINTS

 

PIPE JOINTS

3/8″ N.P.T.

 

1/2″ N.P.T.

FIGURE 4

I M P O R T A N T

Never tighten to more than 35 ft-lbs of torque. Always use an approved pipe joint compound resistant to the action of LP gas.

Locate and join a manual shut-off valve in an accessible location in the gas line ahead of the appliance regulator and external to the appliance for the purpose of turning on or shutting off gas to the appliance.

Make additional pipe connections as necessary ahead of the shut-off valve to the gas supply source. Assure all pipe joint connections are gas tight.

I M P O R T A N T

Apply a non-corrosive leak detection fluid to all joints and fittings in the gas connection between the supply line shut-off valve and the cooktop. Include gas fittings and joints in the cooktop if connections were disturbed during installation. Check for leaks! Bubbles appearing around fittings and connections will indicate a leak. If a leak appears, turn off supply line gas shut-off valve, tighten connections, turn on the supply line gas shut off valve, and retest for leaks. Never test for gas leaks with an open flame.

Note, regarding Figure 4, above:

SFor convenience in service a union (not shown: locally available) should be included in the piping illustrated in figure 4, in a location most practical for the installation. Generally, a practical location is in the cabinet below this appliance, near the manifold entrance, rather than in an adjoining cabinet.

SIf the alternative piping method shown in figure 5 is selected for the installation, no union is required. (The flexible appliance connector illustrated provides the union joints necessary for servicing.) When a dividing wall is present and a flexible connector is used, it is recommended for convenience in both installation and service, that the flexible connector pass through the dividing wall. Any flexible connector used with this appliance must satisfy all requirements stated in the text accompanying figure 5.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Dimensions Cutout Dimensions Are Critical8101P736-60 InchesRequired Adjustments At Time Of Installation Installing Cabinetry Over Your Jenn-Air CooktopLocation Of Your Jenn-Air Appliance Preparation Of CountertopMobile Homes Installation Of ApplianceRecreational Park Trailers Commonwealth Of MassachusettsIllustrative GAS Supply Piping Connecting Appliance To Gas SupplyIf no Other Appliance is to be Installed below this Cooktop Wall Oven Installed below 30″ Cooktop Illustrative Alternative Piping Pressure TestingElectrical Grounding Instructions Electrical Wiring InformationConverting Appliance For Use With LP Gas Installation Of LP Orifice SpudRemoval of Orifice Spud Replace ALL Orifice SpudsHigh Altitude Notice LOW Flame Adjustment See figureConversion of Appliance Pressure Regulator Invert CAP in Appliance Pressure Regulator See figureReset the Valves for Natural GAS Installation Of Natural Gas Orifice SpudsTo Convert Appliance For Use With Natural Gas Burner Model 36″ WideInput Rates Natural GAS / LP GAS BTU/HR Burner Location Burner PerformanceBurner Model 36″ Wide Holding Unit Down To Countertop How To Remove Cooktop For ServicingService-Parts Information Pulgadas DimensionesPreparación de la superficie para cocinar Ubicación de su electrodoméstico Jenn-AirSugerencias importantes de preparación Ajustes necesarios al momento de la instalaciónRemolques de recreación Casas móvilesInstalación del electrodoméstico En la Commonwealth de MassachusettsIlustración DE LA Tubería DE Suministro DE GAS Conexión del electrodoméstico al suministro de gasNota, en referencia a la Figura 4, anterior Ilustración DE LA Tubería Alternativa Pruebas de presiónInstrucciones eléctricas de conexión Tierra Información de alambrado eléctricoPara Quitar LA Copa DE Orificio Conversión del electrodoméstico para usarse con gas LPInstalación de la copa de orificio LP Reemplace Todas LAS Copas DE OrificioConversión DEL Aviso de altitudRegulador DE Presión Inversión DE LA Tapa DEL Regulador DE Presión Vea la figuraReajuste LAS Válvulas Para GAS Natural Instalación de las copas de orificio de Gas naturalInvierta LA Tapa DEL Regulador DE PRESIÓN. Vea la figura Desempeño de los quemadores Información de las piezas de servicio Para sujetar la unidad al mostradorCómo quitar la superficie para cocinar para darle servicio Pouces Manuel DERéglages requis lors de la mise en service Emplacement de votre appareil ménager Jenn-AirPréparation du comptoir Suggestions importantes pour la préparationRoulottes de parc Maisons mobilesPose de l’appareil Dans le Commonwealth du MassachusettsIllustration D’UNE Conduite DE GAZ Raccordement de l’appareil à l’alimentation en gazCuisson DE 30 PO 76,2 CM Four Mural Monté Sous LA Plaque DEIllustration D’UNE Méthode Alternative Vérification de la pressionMise à la terre Câblage électriqueDépose DE L’ÉCROU À Orifice Conversion de l’appareil au gaz GPLPose de l’écrou à orifice pour gaz GPL Remplacer Tous LES Raccords À OrificeConversion DU Utilisation en haute altitudeDétendeur DE L’APPAREIL Inverser LE Capuchon Dans LE DétendeurPose de raccords à orifice pour gaz naturel Régler LES Boutons DE Commande AU GAZ NaturelPour convertir l’appareil au gaz naturel Hi plein feu Débits DE GAZ GAZ NATUREL/GPL BTU/H Emplacement DU BrûleurFonctionnement des brûleurs Informations sur les pièces de rechange Fixation de l’appareil au comptoir

JGC1430 & JGC1536 specifications

Jenn-Air is renowned for its high-quality kitchen appliances, and among its notable offerings are the JGC1430 and JGC1536 gas cooktops. Both models stand out for their performance, elegance, and innovative features, catering to both everyday cooks and culinary enthusiasts.

The Jenn-Air JGC1430 is a 30-inch gas cooktop that combines functionality with style. It features four sealed burners, providing a variety of heat output options to accommodate different cooking needs. The two high-output burners are perfect for quickly boiling water or searing meats, while the two lower-output burners ensure even simmering for delicate sauces. The cooktop’s continuous cast-iron grates allow for smooth movement of pots and pans across the surface, enhancing the cooking experience.

On the other hand, the JGC1536 offers a 36-inch surface area, perfect for larger kitchens or those who require more cooking capacity. This model features five sealed burners, including dual burners that enable precision cooking with a wide range of heat settings. The additional burner provides flexibility when preparing multiple dishes simultaneously. Like the JGC1430, the JGC1536 is equipped with continuous grates and sturdy construction, ensuring durability and ease of use.

Both cooktops boast the innovative Jenn-Air performance technologies. The powerful flame technology delivers robust heat, allowing for efficient cooking and consistent results every time. The appliances also feature precise simmer settings, providing the ability to maintain low heat for extended cooking, which is ideal for sauces and delicate dishes. The oven-like design of the burners enhances heat distribution, ensuring that food is cooked evenly.

Another standout feature of both models is the easy-to-clean design. The sealed burners prevent spills from leaking underneath, while the smooth surface allows for effortless wiping down after cooking. Additionally, the sleek stainless steel finish adds a modern aesthetic to any kitchen.

Safety is a significant consideration in Jenn-Air design as well. Both models include features such as electronic ignition and flame failure detection, ensuring that the burners will automatically shut off if the flame is lost, providing peace of mind during use.

In conclusion, the Jenn-Air JGC1430 and JGC1536 gas cooktops exemplify the brand's commitment to quality, performance, and user-friendly design. With their powerful burners, innovative technology, and stylish aesthetics, these models are ideal choices for anyone looking to elevate their cooking experience.
Top Page Image Contents