Jenn-Air JIC4430X Pan Detection, Control Lock, Performance Boost Function, To Turn Off a Bridge

Page 9

To Turn Off a Bridge:

1.Touch the Bridge keypad for the zone being used (left side bridge or right side bridge).

The surface cooking areas will resume operation as 2 separate areas.

NOTE: Performance Boost cannot be used on the same elements in combination when the Bridge function.

Pan Detection

If the system cannot recognize the pan, or if the pan has been removed from the surface cooking area, the “replace pan” animation appears in the cooking area display as a reminder. See the following illustration.

If the pan is not placed within 30 seconds, the zone(s) will switch Off.

If a Timer is running when a pan is removed, the countdown will continue.

Control Lock

The Control Lock avoids unintended use of the surface cooking areas.

If Control Lock is activated when power to the cooktop is off, the cooktop is locked out, and the surface cooking areas cannot be turned on by the cooktop touch controls.

If Control Lock is activated when power to the cooktop is on, all keypads are locked out except for the Power and On/Off keypads.

To Lock Cooktop:

Touch and hold the CONTROL LOCK keypad for 3 seconds. After 3 seconds, a tone will sound and the indicator light above the Control Lock keypad will light, indicating that the cooktop controls are in the lockout position.

If the cooktop is in use when Control Lock is activated, cooking will proceed as normal and any timers that have been set will continue their countdown.

To Unlock Cooktop:

Touch and hold the CONTROL LOCK keypad for 3 seconds.

Performance Boost Function

This function allows you to increase the heat setting level above the maximum heat setting 9 for 10 minutes or less.

NOTE: Performance Boost is not available when the Bridge function is activated.

30” (76.2 cm) Model JIC4430X

Performance Boost function is available on only 1 surface cooking area at a time within a zone. If you attempt to use another surface cooking area in the same zone, “P” and “9” will briefly flash in the display before returning to heat setting level 9. The surface cooking area that was set to the Performance boost function will automatically reset to heat setting level 9. See the following illustrations for zones.

AD

B

C

Zone 1

Zone 2

A. Surface cooking

C. Surface cooking area 3

area 1

D. Surface cooking area 4

B. Surface cooking

 

area 2

 

36” (91.4 cm) Model JIC4536X

Performance Boost function is available on all surface cooking areas at the same time within a zone. See the following illustrations for zones.

ACD

B

Zone 1

Zone 2

A. Surface cooking

C. Surface cooking

area 1

area 3, dual

B. Surface cooking

element with

area 2

5000W

 

performance

 

boost

E

Zone 3

D. Surface cooking area 4

E. Surface cooking area 5

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 501961901382B DE 30 ET 36 76,2 CM ET 91,4 CMTable DES Matières Cooktop SafetyImportant Safety Instructions 30 76.2 cm Model JIC4430X Cooktop USEInduction Cooking Cooktop Controls36 91.4 cm Model JIC4536X Hot Surface Indicator First use or after a power failureDual Size Surface Cooking Area To UseWhen using Sensor Boil Low SettingsSensor Boil To Turn OnMelt SimmerKeep Warm BridgeControl Lock Pan DetectionPerformance Boost Function To Turn Off a BridgeTones TimerCeramic Glass CookwareCooktop Care General CleaningTroubleshooting Accessories Assistance or ServiceU.S.A CanadaThis limited warranty does not cover JENN-AIRCOOKING Appliance WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Table DE CuissonImportantes Instructions DE Sécurité Modèle JIC4430X de 30 76,2 cm Utilisation DE LA Table DE CuissonCommandes de la table de cuisson Cuisson par inductionModèle JIC4536X de 36 91,4 cm Première utilisation ou après une panne de courant UtilisationIndicateur de surface chaude Ébullition avec capteur Surface de cuisson à dimension doubleModèle JIC4430X de 30 76,2 cm Modèle JIC4536X de 36 91,4 cm ActivationMijotage Réglages de chaleur réduiteFaire fondre Maintien au chaudLiaison Verrouillage des commandesDétection dun plat Fonction doptimisation du rendementSignaux sonores VitrocéramiqueMinuterie Cuisson Ustensiles de cuissonNettoyage général Dépannage Assistance OU Service AccessoiresAu Canada La présente garantie limitée ne couvre pas Garantie DES Appareils DE Cuisson JENN-AIR2011 All rights reserved 501961901382B

JIC4430X specifications

The Jenn-Air JIC4430X is a premium induction cooktop designed for cooking enthusiasts and those who seek modern kitchen technology. This high-performance cooktop integrates sophisticated design with smart features, ensuring that each meal is prepared with precision and ease.

One of the standout features of the Jenn-Air JIC4430X is its powerful induction heating technology. Unlike traditional gas or electric cooktops, induction cooking uses electromagnetic energy to directly heat pots and pans, resulting in faster cooking times and enhanced energy efficiency. With four cooking zones, including an expansive 11-inch element, users can easily accommodate various pot sizes, enabling them to prepare multiple dishes simultaneously without compromising on space.

The cooktop is equipped with a sleek glass surface that not only adds a touch of elegance to the kitchen but also facilitates easy cleaning. Spills and stains can be wiped away effortlessly, making post-cooking clean-up a breeze. Additionally, the cooktop features a stainless steel trim that further enhances its contemporary aesthetic, seamlessly fitting into any modern kitchen design.

Another innovative aspect of the Jenn-Air JIC4430X is its precise temperature control options. With a range of adjustable heat settings, users can swap between gentle simmering and high-heat searing, giving them the ability to master various cooking techniques. The cooktop also incorporates a "Keep Warm" function, maintaining the ideal temperature for dishes until they are ready to serve.

Safety is paramount in kitchen appliances, and the Jenn-Air JIC4430X does not disappoint. With features such as child lock and automatic shut-off, users can feel assured of their safety while cooking. Additionally, the induction technology only heats the cookware, reducing the chances of burns from the cooktop itself.

Enhanced by touchscreen controls, the Jenn-Air JIC4430X allows for easy and intuitive operation. The control panel provides seamless access to settings and power levels, making it easy for chefs of all experience levels to utilize the cooktop effectively.

In summary, the Jenn-Air JIC4430X induction cooktop combines high-efficiency cooking technology with advanced features and elegant design. Whether it's the rapid heating capabilities, precise temperature control, or its intuitive interface, this cooktop is engineered for those who demand both performance and style in their culinary adventures. Embracing modern innovation, the JIC4430X is set to elevate the cooking experience for home chefs everywhere.
Top Page Image Contents