Jenn-Air JIC4430X manual Timer, Tones, Ceramic Glass, Cookware

Page 10

To Use:

1.Check that a surface cooking area has been selected.

2.Touch BOOST. “P” will appear in the display.

3.Touch BOOST keypad when finished. The “P” will no longer be visible in the display, and the Performance boost function will no longer be active. The surface cooking area turns back to heat setting level 9.

NOTE: The Performance boost function may automatically deactivate to keep the internal electronic components of the cooktop from becoming too hot.

Timer

Use the cooking timer to set times up to 90 minutes. The timer is independent of any other control settings. There is a separate timer for each cooking zone.

To Use:

1.Select the desired cooking zone.

2.Touch the TIME keypad. “01” will appear in the timer display.

3.Touch the “>” key to increase the time in 1-minute increments.

or

Touch the “<” key to decrease the time in 1-minute increments.

4.The timer will start to count down after a few seconds. To change the time, touch the time “>” or “<” keypads.

5.When the countdown is finished,”00” flashes and a tone will sound.

NOTE: When the power is restored after an interruption, the timer will no longer be running.

Tones

Tones are audible signals, indicating the following:

One tone

Valid pad press

Slider is moved to “0” power level

Slider is moved to “Boost” power level

For foods containing sugar in any form, clean up all spills and soils as soon as possible. Allow the cooktop to cool down slightly. Then, while wearing oven mitts, remove the spills while the surface is still warm. If sugary spills are allowed to cool down, they can adhere to the cooktop and can cause pitting and permanent marks.

To avoid scratches, do not slide cookware or bakeware across the cooktop.

To avoid damage to the cooktop, do not allow objects that could melt, such as plastic or aluminum foil, to touch any part of the entire cooktop.

To avoid damage to the cooktop, do not use the cooktop as a cutting board.

Use cookware about the same size as the surface cooking area. Cookware should not extend more than ½" (1.3 cm) outside the area.

B

A

C

A. Surface cooking area

B.Cookware/canner

C.½" (1.3 cm) Maximum overhang

Use flat-bottomed cookware for best heat conduction and energy efficiency. Cookware with rounded, warped, ribbed or dented bottoms could cause uneven heating and poor cooking results.

Determine flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.

Make sure the bottoms of pots and pans are clean and dry before using them. Residue and water can leave deposits when heated.

Two tones

Invalid pad press

Three tones

End of Timer cycle

Boiling point is reached when using the Sensor Boil feature

Ceramic Glass

Cleaning off the induction cooktop before and after each use will help keep it free from stains and provide the most even heating. For more information, see “General Cleaning” section.

Avoid storing jars or cans above the cooktop. Dropping a heavy or hard object onto the cooktop could crack the cooktop.

To avoid damage to the cooktop, do not leave a hot lid on the cooktop. As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed.

Cookware

Only ferromagnetic pans can be used for induction cooking.

Ferromagnetic materials include:

Enameled steel

Cast iron

Stainless steel designed for induction cooking

Non-ferromagnetic materials include:

These types of pans will not work with induction cooking.

Stainless steel

Glass

Ceramic

Copper or aluminum pans

To find out whether your pans can be used with an induction cooktop, flip the pan over, hold a magnet to the bottom of the pan, and see whether it sticks. If the magnet sticks to the bottom of the pan, the pan is ferromagnetic and can be used for induction cooking.

10

Image 10
Contents DE 30 ET 36 76,2 CM ET 91,4 CM 501961901382BCooktop Safety Table DES MatièresImportant Safety Instructions Cooktop USE 30 76.2 cm Model JIC4430XCooktop Controls Induction Cooking36 91.4 cm Model JIC4536X Dual Size Surface Cooking Area First use or after a power failureHot Surface Indicator To UseSensor Boil Low SettingsWhen using Sensor Boil To Turn OnKeep Warm SimmerMelt BridgePerformance Boost Function Pan DetectionControl Lock To Turn Off a BridgeCeramic Glass TimerTones CookwareGeneral Cleaning Cooktop CareTroubleshooting U.S.A Assistance or ServiceAccessories CanadaJENN-AIRCOOKING Appliance Warranty This limited warranty does not coverSécurité DE LA Table DE Cuisson Votre sécurité et celle des autres est très importanteImportantes Instructions DE Sécurité Utilisation DE LA Table DE Cuisson Modèle JIC4430X de 30 76,2 cmCuisson par induction Commandes de la table de cuissonModèle JIC4536X de 36 91,4 cm Utilisation Première utilisation ou après une panne de courantIndicateur de surface chaude Modèle JIC4430X de 30 76,2 cm Modèle JIC4536X de 36 91,4 cm Surface de cuisson à dimension doubleÉbullition avec capteur ActivationFaire fondre Réglages de chaleur réduiteMijotage Maintien au chaudDétection dun plat Verrouillage des commandesLiaison Fonction doptimisation du rendementVitrocéramique Signaux sonoresMinuterie Ustensiles de cuisson CuissonNettoyage général Dépannage Accessoires Assistance OU ServiceAu Canada Garantie DES Appareils DE Cuisson JENN-AIR La présente garantie limitée ne couvre pas501961901382B 2011 All rights reserved

JIC4430X specifications

The Jenn-Air JIC4430X is a premium induction cooktop designed for cooking enthusiasts and those who seek modern kitchen technology. This high-performance cooktop integrates sophisticated design with smart features, ensuring that each meal is prepared with precision and ease.

One of the standout features of the Jenn-Air JIC4430X is its powerful induction heating technology. Unlike traditional gas or electric cooktops, induction cooking uses electromagnetic energy to directly heat pots and pans, resulting in faster cooking times and enhanced energy efficiency. With four cooking zones, including an expansive 11-inch element, users can easily accommodate various pot sizes, enabling them to prepare multiple dishes simultaneously without compromising on space.

The cooktop is equipped with a sleek glass surface that not only adds a touch of elegance to the kitchen but also facilitates easy cleaning. Spills and stains can be wiped away effortlessly, making post-cooking clean-up a breeze. Additionally, the cooktop features a stainless steel trim that further enhances its contemporary aesthetic, seamlessly fitting into any modern kitchen design.

Another innovative aspect of the Jenn-Air JIC4430X is its precise temperature control options. With a range of adjustable heat settings, users can swap between gentle simmering and high-heat searing, giving them the ability to master various cooking techniques. The cooktop also incorporates a "Keep Warm" function, maintaining the ideal temperature for dishes until they are ready to serve.

Safety is paramount in kitchen appliances, and the Jenn-Air JIC4430X does not disappoint. With features such as child lock and automatic shut-off, users can feel assured of their safety while cooking. Additionally, the induction technology only heats the cookware, reducing the chances of burns from the cooktop itself.

Enhanced by touchscreen controls, the Jenn-Air JIC4430X allows for easy and intuitive operation. The control panel provides seamless access to settings and power levels, making it easy for chefs of all experience levels to utilize the cooktop effectively.

In summary, the Jenn-Air JIC4430X induction cooktop combines high-efficiency cooking technology with advanced features and elegant design. Whether it's the rapid heating capabilities, precise temperature control, or its intuitive interface, this cooktop is engineered for those who demand both performance and style in their culinary adventures. Embracing modern innovation, the JIC4430X is set to elevate the cooking experience for home chefs everywhere.