To Convert Surface Burners

3.Test the gas pressure regulator and gas supply line.

The regulator must be checked at a minimum 1" (2.5 cm) water column above the set pressure. The inlet pressure to the regulator should be as follows for operation and checking the regulator setting:

LP Gas:

Minimum pressure 11" (27.9 cm) WCP Maximum pressure 14" (35.5 cm) WCP

Gas Supply Pressure Testing

Gas supply pressure for testing regulator must be at least 1" water column pressure above the manifold pressure shown on the model/serial rating plate.

Line pressure testing above ½ psi gauge (14" WCP)

The cooktop and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The cooktop must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

1.If installed, remove the burner grates.

2.Remove burner cap.

3.Remove the burner base.

Large Dual Burner

AA. Burner cap

B	B. Burner base

Medium Burner

AA. Burner cap

C	B	B. Burner base
C

C. Choke (for use with medium burner, LP gas only)

ASmall Burner

BA. Burner cap B. Burner base

4.Apply masking tape to the end of a 7 mm nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into gas opening and press down onto the gas orifice spud and remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside.

5.Replace with correct LP gas orifice spud. See the “LP Gas Orifice Spud/Hood Chart.”

Burner orifice spud

A. Size stamp or color

Use the following chart to find the exact orifice spud placement.

Fully insert choke into bottom of medium burner base. Choke should snap into place.

LP Gas Orifice Spud/Hood Chart

Burner	Color	Size	Burner Style
Rating

3,000 BTU	Blue	0.55 mm	Small burners

11,100 BTU Yellow 0.97 mm Medium burners

14,000 BTU Red/	1.05mm	Large burner - main
Green
Green	0.35 mm	Large burner - simmer

6.Place Natural gas orifice spuds in plastic parts bag for future use and keep with package containing literature.

7.Replace the burner base.

8.Replace burner cap.

9.Repeat steps 2 through 8 for the remaining burners.

Complete Installation

1.Refer to the “Make Gas Connection” section for properly connecting the cooktop to the gas supply.

2.Refer to the “Electronic Ignition System” section for proper burner ignition, operation, and burner flame adjustments.

IMPORTANT: You may have to adjust the “LO” setting for each cooktop burner.

Checking for proper cooktop burner flame is very important. The small inner cone should have a very distinct blue flame ¼" (0.64 cm) to ½" (1.3 cm) long. The outer cone is not as distinct as the inner cone. LP gas flames have a slightly yellow tip.

3.Refer to “Complete Installation” in the “Installation Instructions” section of this manual to complete this procedure.

W10394706A specifications

The Jenn-Air W10394706A is a modern, high-performance appliance designed to enhance the cooking experience in contemporary kitchens. Renowned for its precision, innovation, and sleek aesthetics, this offering from Jenn-Air is a favorite among culinary enthusiasts and home chefs alike.

One of the standout features of the W10394706A is its advanced cooking technologies. It incorporates innovative induction cooking, which provides rapid heating times and precise temperature control. This technology allows users to not only cook more efficiently but also safely, as the cooktop remains cool to the touch, minimizing the risk of burns. The induction system also offers an impressive level of responsiveness, allowing for quick adjustments while cooking, which is crucial for achieving perfect results.

In terms of design, the Jenn-Air W10394706A boasts a sophisticated and modern aesthetic, fitting seamlessly into any upscale kitchen environment. Its sleek surface is easy to clean and maintain, with a minimalistic look that emphasizes functionality without compromising style. The unit is engineered with high-quality materials, ensuring durability, longevity, and an enduring visual appeal.

Another notable feature of the W10394706A is its advanced cooking modes and smart technologies. Equipped with smart connectivity, users can control and monitor their cooking from a smartphone or tablet, providing a level of convenience that is invaluable in today’s fast-paced lifestyle. Additionally, it offers a variety of pre-set cooking modes, enabling effortless culinary creativity and consistency in food preparation.

Safety is paramount with the W10394706A, which integrates features such as automatic shut-off and child lock functionalities. These features ensure peace of mind in any household, promoting safe cooking practices and preventing accidents.

Moreover, the W10394706A emphasizes energy efficiency, utilizing technologies that help reduce energy consumption without sacrificing performance. This focus not only benefits the environment but also results in savings on utility bills, making it an economically conscious choice for households.

Overall, the Jenn-Air W10394706A stands out as an exceptional kitchen appliance that combines cutting-edge technology, elegant design, and practical features. It caters to the needs of discerning cooks, offering versatility and efficiency while enhancing the joy of cooking and entertaining in the modern home.