Installation Of Appliance, Servicing Cooktop

Installation Of Appliance

In The Commonwealth Of Massachusetts

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts.

A “T” handle type manual gas valve must be installed in the gas supply line to this appliance.

A flexible gas connector, when used, must not exceed a length of three (3) feet / 36 inches.

Follow accompanying ducting instructions carefully.

This appliance is designed to always be vented outdoors.

The Countertop Cutout, Cabinet Front Cutout and Duct Opening should be prepared according to the illustration on pages 1 and 2.

Install the Lower Control Panel in the bottom of the Cabinet Cutout as shown using screws from Hardware pack. (Figure 1).

NOTE: For some cabinet styles, it may be necessary to reinforce the front of the cabinet by attaching a brace from front to rear inside the cabinet under the Burner Box.

Install ductwork per ducting instructions provided. Duct openings in cabinet are shown in the drawing on page 1. Make electrical and gas connections as described below in this section of the instructions.

The installation of this appliance must conform with local codes or, in the absence of local codes, with the latest edition of the National Fuel Gas Code, ANSI Z.223.1 USA or current CAN/CGA-B149 INSTALLATION CODE.

The electrical supply required is 110/120-volt, A.C., 15 amp, 60 Hz. This appliance is equipped with a grounded type power cord. A grounded outlet must be provided. It is recommended, for convenience, this outlet be located in the area shown in the shaded illustration. This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the latest edition of the National Electrical Code ANSI/NFPA No. 70 USA or current CSA STANDARD C22.1 Canadian Electrical Code part 1.

User may experience occasional circuit tripping if Ground Fault Circuit Interrupter (GFCI) outlet or breaker is in use.

Figure 1

Position unit in the Countertop Cutout. Main Control Panel should overlap top of Lower Control Panel as shown. (Figure 2).

101/16

(25.56 cm)

46 13/16 (118.90 cm)

Servicing Cooktop

When servicing cooktop it is necessary to remove the main top, prior to removing the control panel.

Figure 2

JGD8348CDP specifications

The Jenn-Air JGD8348CDP is a sophisticated gas cooktop designed for culinary enthusiasts who demand precision, style, and efficiency in their cooking spaces. With its sleek stainless steel finish and modern design, this cooktop not only enhances the aesthetic of any kitchen but also boasts a range of features aimed at delivering exceptional cooking performance.

One of the standout attributes of the Jenn-Air JGD8348CDP is its powerful burners. With five sealed burners, including a high-powered, 20,000 BTU Dual-Flame Burner, this cooktop excels in providing rapid heating and precise simmering capabilities. The dual-flame design allows for a broad range of heat settings, making it perfect for tasks ranging from quickly boiling water to gently melting chocolate without scorching.

The cooktop is equipped with advanced cooking technologies, including the Smart Heat technology that ensures even cooking temperatures across the surface. This feature minimizes hot spots and provides consistent results, thereby enhancing the overall cooking experience. Each burner is meticulously engineered for optimal performance, guaranteeing that home cooks can achieve restaurant-quality results.

Safety is another highlight of the Jenn-Air JGD8348CDP. The unit features an automatic re-ignition system that reignites the flame if it is accidentally blown out, providing peace of mind while cooking. Additionally, the cooktop includes a stainless steel griddle that offers a versatile cooking surface perfect for preparing pancakes, grilled sandwiches, and much more.

Cleaning up after cooking is made easy thanks to the seamless design of the cooktop. The porcelain-coated cast-iron grates are dishwasher safe, allowing for effortless maintenance. The smooth surface ensures that spills can be wiped away quickly, keeping the cooktop looking pristine.

Moreover, the knobs are thoughtfully designed, providing an intuitive interface for adjusting heat levels. With the addition of an integrated electronic ignition system, users can ignite the burners quickly and efficiently with just a turn of the knob.

In summary, the Jenn-Air JGD8348CDP gas cooktop is a premium choice for those looking to elevate their cooking experience. Its powerful burners, advanced technologies, and user-friendly features come together to create a stylish yet functional centerpiece for any kitchen. Whether you're a novice or an experienced chef, this cooktop offers the performance and precision needed to unleash culinary creativity.