Specifications and REQUIREMENTS | Jenn-Air 8101P549-60 instruction

SPECIFICATIONS AND REQUIREMENTS, CONT.

PROVIDE CABINET SUPPORT

IMPORTANT: When installed below a single or double oven, check to be sure that any oven supports above the cutout do not obstruct the 23-1/2" required depth of the warming drawer cutout.

2" x 4" or equivalent runners

231/2"

25"

30"

¥A 2" minimum clearance between oven and warming drawer cutouts is required. Additional clearance may be required if 2" x 4" blocks are used to support runners or solid floor of the oven above.

¥The warming drawer may be supported by either a solid bottom, 2" x 4" or 2" x 2" runners.

¥The support must be level and rigidly mounted, flush with the bottom edge of the cutout.

¥There is no way to level the drawer once it has been installed. Be sure supports are level.

¥The entire weight of the drawer is sup- ported by the runners or solid floor. They must be capable of supporting 150 lbs.

ANTI-TIP BRACE

WARNING

¥An anti-tip brace must be installed to prevent the drawer from tipping for- ward when opened and loaded. Failure to do so could result in personal injury.

¥Before installing anti-tip brace, refer to Wall Oven or Cooktop installation instructions for proper clearance of electrical conduit or power cord.

Install a 2" x 4" or 2" x 2" anti tip brace 9" above the runners and against the rear cabinet wall no more than 23" back from the face to the cabinet frame.

2" x 4" or runners or solid bottom

INSTALLING THE

DRAWER

1.Slide the left corner into opening and push power cord into the hole leading to the outlet location. Thread the cord through as drawer is being pushed back into the opening.

If the outlet is installed inside the open- ing, plug the cord into the outlet. Coil power cord and install it in the clip on the right side of the unit. Make sure the cord does not get trapped by the drawer.

NOTE: Insure that the power cord does not contact the hot surfaces on the bottom of ovens, cooktops, or any other appliance.

2.Push the drawer back until the front flange is flush to the cabinet front.

3.Open the drawer fully.

4.Drill pilot holes through the holes in the overlapping frame, one on each corner.

5.Drive wood screws provided into each corner.

IMPORTANT: Do not operate the Warming Drawer if the decorative front kit has not been installed.

8101P549-60 specifications

The Jenn-Air 8101P549-60 is a premium range hood designed to elevate both functionality and aesthetics in modern kitchens. Known for its sleek design and advanced features, this range hood is an essential appliance for cooking enthusiasts who appreciate both performance and style.

One of the standout features of the Jenn-Air 8101P549-60 is its powerful ventilation system. With a robust motor capable of delivering high airflow rates, it efficiently captures and eliminates smoke, odors, and grease from the kitchen. This ensures that the cooking environment remains fresh and free from lingering smells, which is particularly important in open-concept living spaces.

The range hood’s design incorporates a stainless steel finish, which not only enhances its durability but also adds a contemporary touch to any kitchen décor. The smooth surface is easy to clean, making maintenance simple and straightforward. Additionally, with its low-profile design, the Jenn-Air range hood integrates seamlessly into cabinetry, offering a streamlined look that many homeowners desire.

In terms of technology, the Jenn-Air 8101P549-60 features advanced lighting options. Equipped with energy-efficient LED lights, the range hood provides bright, focused illumination of the cooking surface. This not only enhances visibility while cooking but also adds an ambient glow to the kitchen, creating an inviting atmosphere.

The range hood also boasts a user-friendly control panel, allowing for easy operation. With multiple speed settings, users can customize the ventilation power to suit their cooking needs, whether frying, boiling, or simmering. This flexibility ensures that the hood can adapt to any cooking scenario, providing optimal ventilation every time.

Another notable characteristic is the quiet operation of the Jenn-Air 8101P549-60. Despite its powerful motor, the range hood operates at a lower noise level, allowing for a more pleasant cooking experience without the distraction of excessive noise.

Overall, the Jenn-Air 8101P549-60 is a perfect blend of form and function, making it an excellent choice for homeowners seeking a high-quality range hood. With its powerful ventilation capabilities, modern design, intuitive controls, and energy-efficient features, it stands out as a versatile addition to any kitchen.