Breville BTA820, BTA840 manual Care and cleaning, Storage

CARE, CLEANING AND STORAGE

Care and cleaning

1. Switch the toaster off at the power outlet and	NOTE: DO NOT CLEAN WITH METAL
	SCOURING PADS. PIECES CAN
then remove the power plug from the power
	BREAK OFF THE PAD AND TOUCH
outlet. Allow the toaster to cool completely
	ELECTRICAL PARTS CREATING AN
before cleaning.
2. To clean any crumbs from the toaster, remove	ELECTRIC SHOCK HAZARD.
the crumb tray, located under the control
panel at the front of the toaster, by pulling it
outwards. Empty and replace the crumb tray
before using the toaster again. Replace the
crumb tray by sliding it inwards until it locks
into position.

3.To remove any additional crumbs, turn the toaster upside down over a bin and shake crumbs free.

4.Wipe the outside of the toaster with a slightly dampened soft cloth then polish with a soft dry cloth to dry completely.

STORAGE

Switch the toaster off at the power outlet and remove the power plug from the power outlet. Allow the toaster to cool completely before storing. Follow the directions for cleaning and store in an upright position on a flat surface on a bench top or in an accessible cupboard. Do not store anything on top of the toaster.

WARNING: Do not use the toaster without the slide-out crumb tray in position. Do not allow crumbs to build up in the crumb tray. Failure to clean the crumb tray regularly may result in a fire hazard.

18 CARE, CLEANING AND STORAGE