SURFACE CLEANING

—

Glass Ceramic Cooktop Cleaning

Cleaning of glass ceramic cooktops is different from cleaning a standard porcelain finish. To maintain and protect the surface of your new glass ceramic cooktop follow these basic steps.

DAILY CLEANING: Use only Cook Top Cleaning

Creme on Glass Ceramic.

For normal, light soil:

1.Rub a few drops (less is better) of Cook Top Cleaning Creme onto the soiled area using a dry paper towel. Wipe until all soil and creme are removed. Frequent cleaning leaves a protective coating which is essential in preventing scratches and abrasions.

2.Clean the surface with Cook Top Cleaning Creme after each use.

For heavy, burned on soil:

1.Apply a few drops of Cook Top Cleaning Creme to the (cool) soiled area.

2.Using a dry paper towel, rub creme into the burned on area. As with any bul”ned on spill, this may require some effort.

3.Carefully scrape remaining soil with the razor scraper. Hold the scraper at a 30° angle against the ceramic surface.

4.If any soil remains, repeat the steps listed above. For additional protection, after all soil has been removed, polish the entire surface with the Cook Top Cleaning Creme.

5.Buff with a dry paper towel.

NOTE:

●Using a razor scraper will not damage the surface if the 30° angle is maintained.

●Be sure to use a new, sharp razor scraper.

Do not use a dull or nicked blade.

●Store the razor scraper out of reach of children.

Special Care:

Sugary spillovers (such as jellies, fudge, candy

syrups) or melted plastics can cause pitting of the

surface of your cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when removing hot substances. Follow these instructions carefully and remove the soil while the spill is still hot.

1. Turn off all the surface units affected by the spillover. Remove hot pans.

2. Wearing an oven mitt, hold the razor ~,,,<:,i~,’~, , scraper at a 30° angle to the cooktop -~ v + 1

and scrape the hot spill to a cool area - ,, 4

outside the surface unit.

3.With the spill in a cool area, use a dry paper towel to remove any excess. Any spillover remaining should be left until the surface of the cooktop has cooled.

Do not continue to use the soiled surface unit until all of the spillover has been removed. Follow the steps under Heavy Soil to continue the cleaning process.

General Information:

As the Cook Top Cleaning Creme cleans, it

leaves a protective coating on the cooktop surface. This coating helps to prevent build-up of mineral deposits (water spots) and will make future cleaning easier. Dishwashing detergents remove this protective coating and therefore make the cooktop more susceptible to staining.

To conveniently order more creme and/or scrapers for cleaning your radiant range, please call our toll free number:

National Parts Center

800-626-2002

Creme 10 oz.

# WB02X8273

Scraper

# WX5X1614

Creme and scraper kit

# WB64X5027

.—

PRECAUTIONS

●Most cleaners contain ammonia, chemicals and abrasives which can damage the surface of your cooktop. Use only the Cook Top Cleaning Creme for proper cleaning and protection of your glass ceramic surface.

●If you slide aluminum or copper cookware across the surface of your cooktop, they may leave metal markings which appear as scratches. If this should happen, use the razor scraper and Cleaning Creme to remove these markings. Failure to remove these residues immediately may leave permanent marks.

●Water stains (mineral deposits) are removable

using Cook Top Cleaning Creme or full strength white vinegar.

●If pots with a thin overlay of aluminum, copper, or enamel are allowed to boil dry, the overlay may bond with the glass ceramic and leave a black discoloration. This should be removed immediately before heating again or the discoloration may be permanent.

●Use of window cleaner may leave an iridescent film on the cooktop. Cook Top Cleaning Creme will remove this discoloration.

Read and follow all instructions and warnings

–

 

on Cook Top Cleaning Creme labels.

 

 

 

14

Page 13 Page 15
Page 14
Image 14
GE JSP40, JSP38 warranty Surface Cleaning, Glass Ceramic Cooktop Cleaning, For heavy, burned on soil, General Information
Page 13 Page 15

JSP38, JSP40 specifications

The GE JSP40 and JSP38 are advanced gas turbine models developed by General Electric, renowned for their efficiency, reliability, and cutting-edge technology in power generation. These turbines are designed to meet the demanding requirements of modern energy markets, providing flexible solutions for various applications, including peaking power and baseload generation.

One of the main features of the JSP40 and JSP38 is their advanced aerodynamics, which contribute to high thermal efficiency and reduced emissions. The innovative design of the turbine blades enhances airflow and maximizes energy extraction from the combustion process, leading to improved overall performance. With a base load efficiency exceeding 40 percent, these turbines are positioned as leaders in their class, offering significant fuel savings for operators.

The JSP40 and JSP38 utilize advanced materials and coatings that enhance durability and resistance to high temperatures. This enables them to operate at higher pressure ratios and temperatures compared to earlier models, thereby increasing power output. The use of advanced nickel-based superalloys in the manufacturing of turbine components ensures long service life even under harsh operational conditions.

Additionally, these turbines are equipped with GE’s proprietary DLN (Dry Low NOx) combustion technology. This technology minimizes nitrogen oxide emissions, making the JSP40 and JSP38 compliant with stringent environmental regulations. The DLN systems achieve stable combustion across a wide range of loads, providing operators with the flexibility to efficiently manage varying demand levels while maintaining low emissions.

Both models feature integrated digital controls that provide real-time monitoring and analytics, improving operational efficiency and reducing downtime. GE's sophisticated control systems enable predictive maintenance, ensuring that potential issues are identified before they escalate, thus optimizing maintenance schedules and maximizing turbine availability.

Furthermore, the JSP40 and JSP38 are designed with adaptability in mind. They can be configured to burn a variety of fuels, including natural gas and distillate fuels, allowing fleets to respond to market changes and regulatory requirements seamlessly. This versatility empowers operators to take advantage of different fuel prices while maintaining a reliable power supply.

In summary, the GE JSP40 and JSP38 gas turbines represent a significant advancement in energy technology, combining high efficiency, reliability, and environmental performance. Their innovative features and advanced technologies make them an excellent choice for energy producers looking to meet the challenges of today’s dynamic energy landscape. With continued investment in research and development, GE is poised to maintain its position as a leader in the global power generation market.
Top Page Image Contents