QUESTIONS?

●

●

USE THIS PROBLEM SOLVER

TEl

PROBLEM

“F-” AND A NUMBER FLASH IN THE DISPLAY

OVEN WILL NOT WORK

OVEN LIGHT

DOES NOT WORK

FOOD DOES NOT

BROIL PROPERLY

FOOD DOES NOT ROAST

OR BAKE PROPERLY

—

CLOCK AND MINUTE/SECOND TIMER DO NOT WORK

OVEN WILL NOT

SELF-CLEAN

DOOR WILL NOT OPEN AFTER SELF-CLEAN CYCLE

CONTROL SIGNALS AFTER ENTERING OVEN TIME OR STOP TIME

OVEN TEMPERATURE TOO HOT OR TOO COLD

“BURNING” OR “OILY”

ODOR EMITTING FROM OVEN WHEN TURNED ON

STRONG ODOR

POSSIBLE CAUSE

c This is function error code. Press the CLEAWOFF pad. Allow the oven to cool one hour. Place the oven back into operation. If function error occurs again, disconnect power to the oven and call for service.

●The plug on the range is not completely insefied in the electrical outlet.

●The circuit breaker in your house has been tripped, or a fuse has been blown.

● The oven controls are not properly set.

—

 

●The light bulb is loose or defective. Tighten or replace.

●The switch operating the oven light is broken. Call for service.

●Oven controls not set properly. See the Broiling section.

●Door not left open to the broil stop position as recommended.

●Improper shelf position being used. See the Broiling Guide.

●Food is being cooked on a hot pan.

Q Cookware is not suited for broiling.

●Low voltage. See the Broiling section.

●Aluminum foil used on the broiler pan and rack has not been fitted properly and slit as recommended.

●Oven controls not set properly. See the Baking or Roasting section.

●Shelf position is incorrect. See the Roasting or Baking section.

●Incorrect cookware or cookware of improper size is being used.

●Oven thermostat needs adjustment. See the Adjust the Oven Therrnostat— Dolt Yow-.se~section.

●Make sure electrical plug is plugged into a live, properly grounded power outlet.

●Check for a power outage.

●See the Oven Control, Clock and Timer section.

●Oven temperature is too high to set self-clean operation.

Allow the range to cool to room temperature and reset the controls.

s When the temperature has fallen below the locking temperature door can be opened.

●This is reminding you to enter a bake temperature.

●Oven thermostat needs adjustment. See the Adjust the Oven Thermostat— Do It Yourself section.

s This is nom-d in a new oven and will disappear in time. To speed the process, set a self-clean cycle for a minimum of 3 hours. See the Operating the Self- Cleaning Oven section.

●An odor from the insulation ~ound the inside of the oven is normal for the first few times the oven is used. This is temporary.

(continued next puge)

35

Page 34 Page 36
Page 35
Image 35
GE JSP38, JSP40 warranty TEl, USE this Problem Solver
Page 34 Page 36

JSP38, JSP40 specifications

The GE JSP40 and JSP38 are advanced gas turbine models developed by General Electric, renowned for their efficiency, reliability, and cutting-edge technology in power generation. These turbines are designed to meet the demanding requirements of modern energy markets, providing flexible solutions for various applications, including peaking power and baseload generation.

One of the main features of the JSP40 and JSP38 is their advanced aerodynamics, which contribute to high thermal efficiency and reduced emissions. The innovative design of the turbine blades enhances airflow and maximizes energy extraction from the combustion process, leading to improved overall performance. With a base load efficiency exceeding 40 percent, these turbines are positioned as leaders in their class, offering significant fuel savings for operators.

The JSP40 and JSP38 utilize advanced materials and coatings that enhance durability and resistance to high temperatures. This enables them to operate at higher pressure ratios and temperatures compared to earlier models, thereby increasing power output. The use of advanced nickel-based superalloys in the manufacturing of turbine components ensures long service life even under harsh operational conditions.

Additionally, these turbines are equipped with GE’s proprietary DLN (Dry Low NOx) combustion technology. This technology minimizes nitrogen oxide emissions, making the JSP40 and JSP38 compliant with stringent environmental regulations. The DLN systems achieve stable combustion across a wide range of loads, providing operators with the flexibility to efficiently manage varying demand levels while maintaining low emissions.

Both models feature integrated digital controls that provide real-time monitoring and analytics, improving operational efficiency and reducing downtime. GE's sophisticated control systems enable predictive maintenance, ensuring that potential issues are identified before they escalate, thus optimizing maintenance schedules and maximizing turbine availability.

Furthermore, the JSP40 and JSP38 are designed with adaptability in mind. They can be configured to burn a variety of fuels, including natural gas and distillate fuels, allowing fleets to respond to market changes and regulatory requirements seamlessly. This versatility empowers operators to take advantage of different fuel prices while maintaining a reliable power supply.

In summary, the GE JSP40 and JSP38 gas turbines represent a significant advancement in energy technology, combining high efficiency, reliability, and environmental performance. Their innovative features and advanced technologies make them an excellent choice for energy producers looking to meet the challenges of today’s dynamic energy landscape. With continued investment in research and development, GE is poised to maintain its position as a leader in the global power generation market.
Top Page Image Contents