i@ORTANT SAFETY NOTICE

●The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of

California to publish a list of substances known to the state to cause birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

●The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure

can be minimized by venting with an open window or using a ventilation fan or hood.

When using electrical appliances, basic safety precautions should be followed, including the following:

●Use this appliance only for its intended use

as described in this guide.

●Be sure your appliance is properly installed and grounded by a qualified technician in

-cordance with the provided Installation

.Xructions.

●Do not attempt to repair or replace any part of your range unless it is specifically recommended in this guide. All other servicing

should be referred to a qualified technician.

●Before performing any service, DISCONNECT

THE RANGE PO”WER SUPPLY AT THE HOUSEHOLD DISTRIBUTION PANEL

BY REMOVING THE FUSE OR SWITCHING OFF THE CIRCUIT BREAKER.

AWARNING–

All ranges can tip and injury could result. To prevent accidental tipping of the range, attach it to the wall or floor by installing the Anti-Tip device supplied, Make sure the chain fits securely into the slot in the bracket.

If you pull the range out from the wall for any reason, make sure the device is prope;ly engaged when you push the range back against the wall. If it is not, there is a possible risk d the range tipping over and causing injury if you

child stand, sit or lean on an open door.

Please refer to the Anti-Tip device information in this guide. Failure to take this precaution could

●Do not leave children alone-children should not be left aione or unattended in an area where an appliance is in use. They should never be allowed

to sit or stand on any part of the appliance.

“CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN CABINETS ABOVE A RANGE OR ON THE BACKSPLASH OF A RANGE-CHILDREN CLIMBING ON THE RANGE TO REACH ITEMS COULD BE SERIOUSLY INJURED.

●Teach children not to play with the controls

or any other part of the range.

●Never leave the oven door open when you are

not watching the range.

●Always keep combustible wall coverings, curtains or drapes a safe distance from your range.

●Do not allow anyone to climb, stand or hang on the door, drawer or cooktop. They could damage the range and even tip it over, causing severe personal injury.

●Never wear loose-fitting or hanging garments while using the appliance. Be careful when

reaching for items stored in cabinets over the range. F1ammabIe material couId be ignited if brought in contact with hot surface units or heating elements and may cause severe burns.

* Use only dry pot holders—moist or

damp pot holders on hot surfaces may result in burns from steam. Do not let

pot holders touch hot surface units or heating elements. Do not use a towel or other bulky cloth. Such cloths can catch fire on a hot surface unit or heating element.

●Always keep dish towels, dish cloths, pot holders and other linens a safe distance from your range.

●Always keep wooden and plastic utensils and canned food a safe distance away from your range.

. For your safety, never use your appliance for warming or heating the room.

●DO “NOT STORE OR USE COMBUSTIBLE MATERIALS, GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS

IN THE VICINITY OF THIS OR ANY

OTHER APPLIANCE.

(continued next page)

result in tipping of the range and injury.

3

 

 

 

Page 2 Page 4
Page 3
Image 3
GE JSP38, JSP40 warranty Awarning, @ORTANT Safety Notice, Result in tipping of the range and injury
Page 2 Page 4

JSP38, JSP40 specifications

The GE JSP40 and JSP38 are advanced gas turbine models developed by General Electric, renowned for their efficiency, reliability, and cutting-edge technology in power generation. These turbines are designed to meet the demanding requirements of modern energy markets, providing flexible solutions for various applications, including peaking power and baseload generation.

One of the main features of the JSP40 and JSP38 is their advanced aerodynamics, which contribute to high thermal efficiency and reduced emissions. The innovative design of the turbine blades enhances airflow and maximizes energy extraction from the combustion process, leading to improved overall performance. With a base load efficiency exceeding 40 percent, these turbines are positioned as leaders in their class, offering significant fuel savings for operators.

The JSP40 and JSP38 utilize advanced materials and coatings that enhance durability and resistance to high temperatures. This enables them to operate at higher pressure ratios and temperatures compared to earlier models, thereby increasing power output. The use of advanced nickel-based superalloys in the manufacturing of turbine components ensures long service life even under harsh operational conditions.

Additionally, these turbines are equipped with GE’s proprietary DLN (Dry Low NOx) combustion technology. This technology minimizes nitrogen oxide emissions, making the JSP40 and JSP38 compliant with stringent environmental regulations. The DLN systems achieve stable combustion across a wide range of loads, providing operators with the flexibility to efficiently manage varying demand levels while maintaining low emissions.

Both models feature integrated digital controls that provide real-time monitoring and analytics, improving operational efficiency and reducing downtime. GE's sophisticated control systems enable predictive maintenance, ensuring that potential issues are identified before they escalate, thus optimizing maintenance schedules and maximizing turbine availability.

Furthermore, the JSP40 and JSP38 are designed with adaptability in mind. They can be configured to burn a variety of fuels, including natural gas and distillate fuels, allowing fleets to respond to market changes and regulatory requirements seamlessly. This versatility empowers operators to take advantage of different fuel prices while maintaining a reliable power supply.

In summary, the GE JSP40 and JSP38 gas turbines represent a significant advancement in energy technology, combining high efficiency, reliability, and environmental performance. Their innovative features and advanced technologies make them an excellent choice for energy producers looking to meet the challenges of today’s dynamic energy landscape. With continued investment in research and development, GE is poised to maintain its position as a leader in the global power generation market.
Top Page Image Contents