Avanti BD7000  Spanner Faucet Wrench,  Plastic Faucet Lever,  Dispensing Beer, Barrel

Page 14

Spanner Faucet Wrench

Spanner faucet wrench provided for either removing or tightening connection

Plastic Faucet Lever

Attach the black plastic lever (pull handle) provided on the top of the faucet by tighten it by hand clockwise until the end, holding in the process the silver snug underneath so it does not move.

If there is still a small drip from the faucet, you may have tightened the plastic lever too much and may need to unscrew silver snug counter- clockwise (as shown) one turn. That should correct the problem if exists.

Dispensing Beer:

Keep beer keg refrigerated at all times.

Never allow beer lines to dry out.

Use clean beer glassware before pouring.

Hold glass at a 45° angle when 2/3 full, start to straighten glass and tap it off.

Always make sure the faucet handle is pushed all the way back.

Note: Keg sizes that can be used in your beer dispenser

1/2 barrel

59 Liters

15.5 gals

1984 oz.

164/12-oz. Glass

1/4 barrel

30 Liters

7.8 gals.

992 oz.

82/12-oz. Glass

1/6 barrel

20 Liters

5.2 gals.

661 oz.

55/ 12-oz. Glass

1/8 barrel

15 Liters

4.0 gals.

496 oz.

41/ 12-oz. Glass

Note: Our Beer dispenser accepts almost all, Brand Name ½ kegs. However Coors’ kegs do not fit in our unit.

Converting Your Beer Dispenser To An “All Refrigerator”.

1.Turn off the control knob to the “OFF” position.

2.Close the main valve on the CO2 cylinder.

3.Close the secondary shut-off valve on the regulator pipe.

4.Close the connection between the beer keg and the keg coupler.

5.Drain any remaining beer from the lines.

6.Disconnect the beer line and CO2 air line from the keg coupler

7.Remove the beer keg .

8.Remove the keg coupler.

9.Disconnect the air line from the CO2 cylinder.

10.Remove the CO2 air line from cabinet plug

11.Remove the beer tower. Also pull the beer line thru the top of the cabinet

12.Replace the top cabinet plug

13.Put the wire shelves provided and install them on the side supports.

14.Adjust temperature as desired.

NOTE: Our Beer dispenser accepts almost all Brand Name ½ kegs. However Coors’ kegs do not fit in our unit.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Manual DE Instrucciones La sección en español empieza en la páginaTable of Contents Beer Dispenser Safety Your safety and the safety of others are very importantImportant Safeguides Read this guide carefully Avanti Customer ServiceHelp US Help YOU Write down the model and serial numbersParts and Features Parts / Accessories Detailed Accessories Qty Before Using Your Beer Dispenser Important Safety InstructionsInstallation Instructions  Installation of Your Beer DispenserWarning  Extension CordCO2 GAS can be Dangerous  Reversing the Door Swing of Your ApplianceBeer Keg Installation Sketch Installation of CO2 Regulator Installation Of The Beer Tower Installation Of CO2 Tank Fasterner see illustriation belowInstallation of the Keg Coupler Adjusting The CO2 Regulator Connecting the beer tower to couplerHow To Tap a Keg Of Beer Installation of Protective Plate Dispensing Beer  Spanner Faucet Wrench Plastic Faucet Lever  Converting Your Beer Dispenser To An All RefrigeratorCare and Maintenance Operating Your Beer DispenserCauses Corrections Flat Beer OFF-TASTE Beer Sour BeerWild Beer Cause CorrectionsPage Troubleshooting Guide Service for Your Beer DispenserWhat is not Covered What is Covered Limited ONE-YEAR WarrantyLimited Second Through Fifth Year Warranty Instrucciones Para LA Instalacion Instrucciones EN EspañolGuarde estas instrucciones  Antes de Usar su Electrodoméstico Conexión eléctrica AdvertenciaInstalación de la torre al acoplador Instalación del Cilindro de CO2 GAS CarbonicoInstalación del Regulador de CO2 GAS Carbonico Instalación de la Línea de Aire dentro del CompartimientoComo abrir la válvula principal del CO2 GAS Carbonico Instalación de la manguera de aire CO2 GAS CarbonicoComo servir la cerveza desde la Torre Como ajustar el regulador del CO2 GAS Carbonico Descongelamiento Automático Usando SU Dispensador DE Cerveza Control de temperatura  Limpieza de su Dispensador de Cerveza Cuidado Y Mantenimiento Instalación de la puerta del Dispensador de Cerveza  Si usted sale de vacacionesCerveza Turbia Cerveza AcidaCerveza SIN Cuerpo Perdida DE Espuma Cerveza SIN SaborCerveza Rebelde Problemas CON SU Dispensador DE Cerveza Guia Para Solucionar ProblemasNotas How Did You Learn About This Product  Promote better productsIs This Product Used VER

BD7000 specifications

The Avanti BD7000 is a state-of-the-art electric vehicle developed for modern urban driving. With a sleek design and an array of advanced technologies, the BD7000 exemplifies efficiency and sustainability, making it a top choice among eco-conscious consumers.

One of the standout features of the Avanti BD7000 is its powerful electric drivetrain. It comes equipped with a robust battery system that boasts an impressive range, allowing drivers to travel long distances without the inconvenience of frequent recharging. The BD7000 supports fast charging, significantly reducing downtime and making it suitable for both everyday commutes and longer journeys.

The vehicle is also designed with aerodynamics in mind, featuring a streamlined body that minimizes drag and enhances overall efficiency. This aerodynamic design is complemented by lightweight materials used in the construction, resulting in improved performance and handling. The vehicle’s low center of gravity contributes to enhanced stability, making it a joy to drive.

In terms of technology, the Avanti BD7000 is ahead of its competition. The vehicle features an intuitive infotainment system that integrates seamlessly with smartphones, allowing for hands-free navigation, music streaming, and real-time weather updates. The BD7000 also includes advanced safety features such as collision detection, lane-keeping assist, and automatic emergency braking, ensuring peace of mind for drivers and passengers alike.

Comfort is another hallmark of the Avanti BD7000. The spacious interior is designed with premium materials, offering ample legroom and cargo space. The seats are ergonomically designed, ensuring a comfortable ride, whether it’s a short trip across town or a longer road trip. Additionally, the vehicle is equipped with climate control features, allowing passengers to enjoy a pleasant atmosphere regardless of external weather conditions.

Furthermore, the BD7000 emphasizes sustainability not just through its electric powertrain but also in its manufacturing process. The car is built with recyclable materials and adheres to eco-friendly production practices, appealing to environmentally conscious consumers.

In conclusion, the Avanti BD7000 is a remarkable electric vehicle that combines performance, cutting-edge technology, and sustainable practices. Its impressive range, safety features, and attention to driver comfort make it a compelling option for those looking to embrace the future of transportation while remaining mindful of their environmental footprint. As the automotive landscape continues to evolve, the BD7000 stands out as a beacon of innovation and eco-friendliness.
Top Page Image Contents