Important Safeguides

Before the appliance is used, it must be properly positioned and installed as described in this manual,so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.

Replace all panels before operating.

It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.

Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

Do not connect or disconnect the electric plug when your hands are wet.

Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

Use two or more people to move and install appliance. Failure to do so can result in back or other injury.

To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips.

The appliance should not be located next to ovens, grills or other sources of high heat.

The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.

Do not kink or pinch the power supply cord of appliance.

The fuse (or circuit breaker) size should be 15 amperes.

It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.

All installation must be in accordance with local plumbing code requirements.

Make certain that the pipes are not pinched or kinked or damaged during installations.

Check for leaks after connection.

Never allow children to operate, play with or crawl inside the appliance.

If you use the drainage container, you must set the drain select switch to OFF or the water can overflow from the drainage container

Although the unit has been tested at the factory, due to long-term transit and storage, the first batch of cubes must be discarded.

Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor the interior.

Do not use this apparatus for other than its intended purpose.

BD7000 specifications

The Avanti BD7000 is a state-of-the-art electric vehicle developed for modern urban driving. With a sleek design and an array of advanced technologies, the BD7000 exemplifies efficiency and sustainability, making it a top choice among eco-conscious consumers.

One of the standout features of the Avanti BD7000 is its powerful electric drivetrain. It comes equipped with a robust battery system that boasts an impressive range, allowing drivers to travel long distances without the inconvenience of frequent recharging. The BD7000 supports fast charging, significantly reducing downtime and making it suitable for both everyday commutes and longer journeys.

The vehicle is also designed with aerodynamics in mind, featuring a streamlined body that minimizes drag and enhances overall efficiency. This aerodynamic design is complemented by lightweight materials used in the construction, resulting in improved performance and handling. The vehicle’s low center of gravity contributes to enhanced stability, making it a joy to drive.

In terms of technology, the Avanti BD7000 is ahead of its competition. The vehicle features an intuitive infotainment system that integrates seamlessly with smartphones, allowing for hands-free navigation, music streaming, and real-time weather updates. The BD7000 also includes advanced safety features such as collision detection, lane-keeping assist, and automatic emergency braking, ensuring peace of mind for drivers and passengers alike.

Comfort is another hallmark of the Avanti BD7000. The spacious interior is designed with premium materials, offering ample legroom and cargo space. The seats are ergonomically designed, ensuring a comfortable ride, whether it’s a short trip across town or a longer road trip. Additionally, the vehicle is equipped with climate control features, allowing passengers to enjoy a pleasant atmosphere regardless of external weather conditions.

Furthermore, the BD7000 emphasizes sustainability not just through its electric powertrain but also in its manufacturing process. The car is built with recyclable materials and adheres to eco-friendly production practices, appealing to environmentally conscious consumers.

In conclusion, the Avanti BD7000 is a remarkable electric vehicle that combines performance, cutting-edge technology, and sustainable practices. Its impressive range, safety features, and attention to driver comfort make it a compelling option for those looking to embrace the future of transportation while remaining mindful of their environmental footprint. As the automotive landscape continues to evolve, the BD7000 stands out as a beacon of innovation and eco-friendliness.