Web Access
3 Web Access
Web Access lets you monitor and control the room and is automatically generated by Kramer
You can login to Web Access either via the
To enter Web Access via your Internet browser, make sure that your PC is connected via a network to the Room Controller, and do the following:
1.Open your Internet browser.
2.Enter the unit’s IP number1 in the Address bar of your browser.
Figure 10: Entering the IP Number in the Address Bar
3.You will be prompted to enter your user name (User or Admin) and password2 to login:
Figure 11: Web Access Login
The administrator can control the room via Web Access, performing tasks such as scheduling, switching inputs, setting the audio and so on. The tasks available for the user are limited. Table 5 summarizes the tasks performed by the User and the Administrator:
Table 5: User and Administrator Available Operations using Web Access
Tasks | User | Administrator |
Master Room | Click inputs/configurable | Select buttons, audio adjustment, advanced audio |
Controller | buttons, audio adjustment | settings |
Auxiliary Controller | Click configurable buttons | Click configurable buttons |
Device Serial | Click serial command | Click serial command |
commands |
|
|
Macros | Activate | Activate |
Scheduled Tasks | No access | Write, delete and edit tasks |
Settings | View only | Change: Name (Master and Auxiliary devices), IP |
|
| Address, DHCP, Gateway, Subnet Mask, Date, Time |
1 The default IP number is 192.168.1.39, and may be changed by the system integrator
2 The factory default password is admin. The password can be changed via Kramer
9