Bloomfield 8740 owner manual Brewing TEA, Solenoid Time Adjustment

Page 10

BREWING TEA

CAUTION:

BURN HAZARD

Exposed surfaces of the brewer, brew chamber and dispenser may be HOT to the touch, and can cause serious burns.

CAUTION:

BURN HAZARD

To avoid splashing or overflowing hot liquids, ALWAYS place an empty dispenser under the brew chamber before starting the brew cycle. Failure to comply can cause serious burns.

CAUTION:

BURN HAZARD

After a brew cycle, brew chamber contents are HOT. Remove the brew chamber and dispose of used tea leaves with care. Failure to comply can cause serious burns.

A. PREPARATION

Place one (1) genuine Bloomfield paper filter into the brew chamber.

Add an amount of fresh tea leaves to the brew chamber appropriate to the brew volume.

NOTE: the brewer can brew any

 

 

 

volume between 3 and 5 gallons,

 

 

 

and is factory set for a 3 gallons

 

 

 

 

 

 

brew volume. If other brew

 

 

 

Fig. 7 Tea Brew Chamber

volumes are desired, refer to

 

 

 

SOLENOID TIME ADJUSTMENT,

 

 

 

page 13.

 

 

 

Gently shake the brew chamber to level the bed of tea leaves. Slide the brew chamber into place under the brew head.

B.AUTOMATIC OPERATION

BE sure “READY TO BREW” light is lit.

Place the appropriate EMPTY dispenser in place under the brew chamber. If a brew-thru lid is used, be sure the bypass opening in the lid is directly under the bypass nozzle.

Press the “BREW” switch. The brew solenoid will open for an amount of time determined by the timer setting, admitting a measured quantity of water into the tank.

Inlet water will displace a like amount of heated water from the tank. The hot water will be forced into the brew head where it will spray over the bed of grounds. Freshly brewed tea will begin to fill the dispenser. Additionally, a measured amount of cold dilution water will flow from the bypass nozzle into the dispenser.

When the flow and all dripping stops at the end of the brew cycle, the tea is ready to serve.

Discard the contents of the brew chamber and rinse it in a sink. When the ”READY TO BREW” light glows, the brewer is ready for another brew cycle.

608 p/n 76467 8740 Tea Brewer Owners Manual

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 608 Warranty Statement Specifications Applicability Table of ContentsIntroduction Features and Operating Controls Model 8740 Features and Operating ControlsEquipment Damage Precautions and General InformationAgency Listing Information Burn HazardPLUMBER’S Installation Instructions InstallationUnstable Equipment Hazard Shock Hazard ELECTRICIAN’S Installation InstructionsPreparation Operation START-UPWater Heater Automatic OperationSolenoid Time Adjustment Brewing TEAFrequency Cleaning InstructionsPrecautions ToolsTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyAccess Panels Access PlugsServicing Instructions Temperature Adjustment Servicing InstructionsReplace Thermostat Solenoid Timer AdjustmentRemove Tank LID Assembly Replace Heating ElementReplace Timer Assembly Clean Solenoid ScreenReplace Solenoid Procedure Delime the Water Tank Chemical Burn HazardModel Description Service Kits Solenoid Repair KitsWiring Diagram Genuine Parts

8740 specifications

Bloomfield 8740 is an innovative and advanced product designed to meet the demands of modern users. As a versatile piece of equipment, it is engineered to enhance productivity, efficiency, and user experience across various applications. One of the standout features of the Bloomfield 8740 is its powerful processing capabilities. It integrates cutting-edge hardware components, including a high-speed processor and ample memory, allowing for swift data handling and multitasking.

This product is constructed with durability in mind, using high-quality materials to ensure longevity in demanding environments. The ergonomic design promotes ease of use, making it comfortable for extended periods of operation. The Bloomfield 8740 is also equipped with a user-friendly interface, offering seamless navigation through various functions and features. Its intuitive controls are designed to minimize the learning curve, enabling users to maximize its capabilities from the outset.

In terms of technology, the Bloomfield 8740 incorporates state-of-the-art connectivity options, including both wired and wireless solutions. This ensures compatibility with a range of peripheral devices and networks, making it an ideal choice for professional settings. Enhanced security features are also a priority, with advanced encryption methods and user authentication protocols to safeguard sensitive data.

The Bloomfield 8740 supports a variety of software applications, ensuring versatility across different industries. Its compatibility with multiple operating systems further bolsters its appeal, allowing users to utilize existing software without the need for significant adjustments. Furthermore, the product incorporates energy-saving technologies, which not only reduce operational costs but also contribute to environmental sustainability.

The Bloomfield 8740 is designed with expandability in mind, allowing users to upgrade components as needed. This future-proofing approach ensures that the product remains relevant and capable of handling emerging technologies. Maintenance is simplified, with modular components that can be easily replaced or serviced.

In summary, the Bloomfield 8740 stands out for its powerful processing capabilities, durability, user-friendly design, and advanced technological features. These characteristics make it a highly sought-after solution for users looking to optimize performance while maintaining efficiency and security. With its comprehensive feature set, the Bloomfield 8740 is poised to meet the evolving needs of its users for years to come.
Top Page Image Contents