Bloomfield 8740 owner manual Warranty Statement

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

WELLS BLOOMFIELD, LLC SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transporta- tion charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Wells Bloomfield, LLC

P.O. Box 280

 

Verdi, NV 89439

 

Phone: (775) 689-5707

Fax: (775) 689-5976

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

608 p/n 76467 8740 Tea

SHIPPING DAMAGE CLAIMS PROCEDURE

Brewer

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Wells Bloomfield cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

Owners Manual

xi

Image 2
Contents 608 Warranty Statement Introduction Table of ContentsSpecifications Applicability Features and Operating Controls Model 8740 Features and Operating ControlsEquipment Damage Precautions and General InformationAgency Listing Information Burn HazardUnstable Equipment Hazard InstallationPLUMBER’S Installation Instructions Preparation ELECTRICIAN’S Installation InstructionsShock Hazard Operation START-UPWater Heater Automatic OperationSolenoid Time Adjustment Brewing TEAFrequency Cleaning InstructionsPrecautions ToolsTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyServicing Instructions Access PlugsAccess Panels Temperature Adjustment Servicing InstructionsReplace Thermostat Solenoid Timer AdjustmentRemove Tank LID Assembly Replace Heating ElementReplace Solenoid Clean Solenoid ScreenReplace Timer Assembly Procedure Delime the Water Tank Chemical Burn HazardModel Description Service Kits Solenoid Repair KitsWiring Diagram Genuine Parts

8740 specifications

Bloomfield 8740 is an innovative and advanced product designed to meet the demands of modern users. As a versatile piece of equipment, it is engineered to enhance productivity, efficiency, and user experience across various applications. One of the standout features of the Bloomfield 8740 is its powerful processing capabilities. It integrates cutting-edge hardware components, including a high-speed processor and ample memory, allowing for swift data handling and multitasking.

This product is constructed with durability in mind, using high-quality materials to ensure longevity in demanding environments. The ergonomic design promotes ease of use, making it comfortable for extended periods of operation. The Bloomfield 8740 is also equipped with a user-friendly interface, offering seamless navigation through various functions and features. Its intuitive controls are designed to minimize the learning curve, enabling users to maximize its capabilities from the outset.

In terms of technology, the Bloomfield 8740 incorporates state-of-the-art connectivity options, including both wired and wireless solutions. This ensures compatibility with a range of peripheral devices and networks, making it an ideal choice for professional settings. Enhanced security features are also a priority, with advanced encryption methods and user authentication protocols to safeguard sensitive data.

The Bloomfield 8740 supports a variety of software applications, ensuring versatility across different industries. Its compatibility with multiple operating systems further bolsters its appeal, allowing users to utilize existing software without the need for significant adjustments. Furthermore, the product incorporates energy-saving technologies, which not only reduce operational costs but also contribute to environmental sustainability.

The Bloomfield 8740 is designed with expandability in mind, allowing users to upgrade components as needed. This future-proofing approach ensures that the product remains relevant and capable of handling emerging technologies. Maintenance is simplified, with modular components that can be easily replaced or serviced.

In summary, the Bloomfield 8740 stands out for its powerful processing capabilities, durability, user-friendly design, and advanced technological features. These characteristics make it a highly sought-after solution for users looking to optimize performance while maintaining efficiency and security. With its comprehensive feature set, the Bloomfield 8740 is poised to meet the evolving needs of its users for years to come.