Bloomfield 8740 owner manual Shock Hazard, ELECTRICIAN’S Installation Instructions, Preparation

Page 7

608 p/n 76467 8740 Tea Brewer Owners Manual

ELECTRICIAN’S INSTALLATION INSTRUCTIONS

REFER TO ELECTRICAL SPECIFICATIONS - Page 1 Check the nameplate to determine correct electrical service required for the Brewer to be installed.

IMPORTANT: Before connecting to electricity, make sure automatic brewers are connected to the water supply.

Model 8740 is equipped with a cord and plug.

It requires a 115 - 125 volt 20 amp circuit (50/60 Hz, 2 wire plus ground, with NEMA 5-15R receptacle).

PREPARATION

The water tank must be filler prior to operation. Slide an empty brew chamber in place under the brew head. Place an empty dispenser under the brew chamber.

Be sure the unit is connected to the water supply, the water supply is turned ON and the "TANK HEATER SWITCH" is OFF. Connect the unit to electric power.

Press the "START BREW" switch to initiate a brew cycle. The solenoid will open and begin filling the tank. Initiate consecutive brew cycles until water begins to flow from the brew head.

When all water stops dripping, discard all water generated. Press the "TANK HEATER SWITCH" to ON. The heating elements will begin heating the water in the tank. When the "READY TO BREW" light glows the unit is ready for use.

INSTALLATION (continued)

WARNING

SHOCK HAZARD

Brewer must be properly grounded to prevent possible shock hazard. DO NOT assume a plumbing line will provide such a ground. Electrical shock will cause death or serious injury.

IMPORTANT:

Supply power must match nameplate for voltage and phase. Connecting to the wrong voltage will damage the brewer or result in decreased performance.

Such damage is not covered by warranty.

GROUND

PIN

NEMA 5-15P

NEMA 5-15R

PLUG

RECEPTACLE

Fig. 3 Plug Configuration

IMPORTANT: The ground prong of the plug is part of a system designed to protect you from electrical shock in the event of internal damage. Never cut off the ground prong nor twist a blade to fit an existing receptacle. Contact a licensed electrician to install the proper circuit and receptacle.

IMPORTANT: Do not connect brewer to electrical power until you are ready to fill the tank.

See instructions at left.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 608 Warranty Statement Specifications Applicability Table of ContentsIntroduction Model 8740 Features and Operating Controls Features and Operating ControlsBurn Hazard Precautions and General InformationAgency Listing Information Equipment DamagePLUMBER’S Installation Instructions InstallationUnstable Equipment Hazard Shock Hazard ELECTRICIAN’S Installation InstructionsPreparation START-UP OperationAutomatic Operation Water HeaterBrewing TEA Solenoid Time AdjustmentTools Cleaning InstructionsPrecautions FrequencySymptom Possible Cause Suggested Remedy Troubleshooting SuggestionsAccess Panels Access PlugsServicing Instructions Servicing Instructions Temperature AdjustmentReplace Heating Element Solenoid Timer AdjustmentRemove Tank LID Assembly Replace ThermostatReplace Timer Assembly Clean Solenoid ScreenReplace Solenoid Chemical Burn Hazard Procedure Delime the Water TankModel Description Solenoid Repair Kits Service KitsWiring Diagram Genuine Parts

8740 specifications

Bloomfield 8740 is an innovative and advanced product designed to meet the demands of modern users. As a versatile piece of equipment, it is engineered to enhance productivity, efficiency, and user experience across various applications. One of the standout features of the Bloomfield 8740 is its powerful processing capabilities. It integrates cutting-edge hardware components, including a high-speed processor and ample memory, allowing for swift data handling and multitasking.

This product is constructed with durability in mind, using high-quality materials to ensure longevity in demanding environments. The ergonomic design promotes ease of use, making it comfortable for extended periods of operation. The Bloomfield 8740 is also equipped with a user-friendly interface, offering seamless navigation through various functions and features. Its intuitive controls are designed to minimize the learning curve, enabling users to maximize its capabilities from the outset.

In terms of technology, the Bloomfield 8740 incorporates state-of-the-art connectivity options, including both wired and wireless solutions. This ensures compatibility with a range of peripheral devices and networks, making it an ideal choice for professional settings. Enhanced security features are also a priority, with advanced encryption methods and user authentication protocols to safeguard sensitive data.

The Bloomfield 8740 supports a variety of software applications, ensuring versatility across different industries. Its compatibility with multiple operating systems further bolsters its appeal, allowing users to utilize existing software without the need for significant adjustments. Furthermore, the product incorporates energy-saving technologies, which not only reduce operational costs but also contribute to environmental sustainability.

The Bloomfield 8740 is designed with expandability in mind, allowing users to upgrade components as needed. This future-proofing approach ensures that the product remains relevant and capable of handling emerging technologies. Maintenance is simplified, with modular components that can be easily replaced or serviced.

In summary, the Bloomfield 8740 stands out for its powerful processing capabilities, durability, user-friendly design, and advanced technological features. These characteristics make it a highly sought-after solution for users looking to optimize performance while maintaining efficiency and security. With its comprehensive feature set, the Bloomfield 8740 is poised to meet the evolving needs of its users for years to come.
Top Page Image Contents