CLEANING INSTRUCTIONS (continued)
PROCEDURE: Clean Satellite | CAUTION: |
BURN HAZARD
671 76601 Owners Manual 9221 Dual Satellite Brewer
PRECAUTIONS: | Drain Satellite before Cleaning |
FREQUENCY: | Twice Weekly |
TOOLS: | Sight Glass Brush, Sanitizer |
| Soft Clean Cloth, Bucket |
|
|
|
|
1.Remove and drain satellites. Remove lids.
2.Place 1 packet of Sanitizer into
3.Drain sanitizer solution from satellite into the bucket.
4.Disassemble faucet. Brush clean with sanitizer solution. Reassemble faucet.
5.If necessary, disassemble and clean sight glass.
a.Push down on ears on sight glass guard . Then, pull ears forward. Lift guard off of retaining clip.
b.Remove sight glass tube from silicone elbow. Run the sight glass brush through the tube at least ten times.
c.Reassemble the tube to the silicone elbow. Be sure the elbow has not been pulled from the satellite body.
d.Reinstall the sight glass guard.
6.Reinstall lids. Install satellites on brewer.
7.Rinse satellites: With an empty brew chamber in place, press the BREW key and run 1 full cycle into each satellite.
8.Drain water from satellites.
Procedure is complete
Brewing and serving temperatures of coffee are extremely hot. Hot coffee will cause serious skin burns.
IMPORTANT:
DO NOT submerge satellite in water.
IMPORTANT:
DO NOT use steel wool, sharp objects, or caustic, abrasive or chlorinated cleansers to clean the satellites.
Sight Glass
11