Bloomfield 9102A, 9104A owner manual Warranty Statement

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by BLOOMFIELD INDUSTRIES is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD INDUSTRIES DIVISION / SPECIALTY EQUIPMENT MANUFACTURING CORPORATION SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Industries Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transportation charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Bloomfield Industries

P.O. Box 280

Verdi, NV 89439

 

Phone: (888) 492-2782

Fax: (888) 492-2783

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

663 76061 Owners Manual for

SHIPPING DAMAGE CLAIMS PROCEDURE

9102A

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Bloomfield Industries cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

Single Satellite Brewer

Image 2
Contents For WithWarranty Statement Table of Contents SpecificationsFeatures and Operating Controls Brew Chamber BrewerControl Panel SatelliteAgency Approval Information General Information and PrecautionsBurn Hazard PLUMBER’S Installation Instructions Installation InstructionsInstall Legs Level the UnitELECTRICIAN’S Installation Instructions Initial SET-UP InstructionsOperating Instructions Brewing CoffeeBrew & Bypass HOT Water FaucetProcedure Clean Coffee Brewer Cleaning InstructionsCleaning Instructions Procedure Clean SatelliteTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyAccess Panels Servicing InstructionsTemperature Adjustment Brew Timer Adjustment Bypass Adjustment 9104A only Procedure Delime the Water Tank Chemical Burn HazardServicing Instructions Exploded View Electrical Components Cabinet & Related Components Satellite Assembly 9105SS Service Kits Faucet Repair KitsWiring Diagrams Telephone Fax For orders only

9104A, 9102A specifications

Bloomfield 9104A and 9102A are two latest innovations in the realm of advanced manufacturing equipment, specifically designed for high efficiency and precision in various industrial applications. These models stand out due to their unique features, state-of-the-art technologies, and robust characteristics, making them suitable for both small-scale operations and large industrial setups.

The Bloomfield 9104A is tailored for a wide array of applications, offering improved performance metrics compared to its predecessors. One of its standout features is the enhanced processing speed, which reduces production time significantly. This is largely due to its advanced control system, which integrates real-time data analytics and machine learning algorithms. This enables predictive maintenance, minimizing downtime and ensuring smoother operational flow.

On the other hand, the Bloomfield 9102A is optimized for versatility and user-friendliness. It boasts an intuitive interface that allows operators to adjust settings with ease, enhancing overall productivity. The unit is designed to handle a variety of materials, demonstrating its flexibility in manufacturing processes. Its compact design does not compromise performance, making it ideal for facilities with limited space.

Both models employ cutting-edge technologies that cater to modern manufacturing requirements. The inclusion of IoT connectivity allows for seamless integration into smart factories. This feature enables remote monitoring and control, as well as the capability to gather performance data for further analysis and optimization.

As for characteristics, durability and reliability are key aspects of both models. Built with high-quality materials and components, they are designed to withstand the rigors of continuous operation. Additionally, the energy-efficient designs contribute to lower operational costs and a reduced carbon footprint, fulfilling the growing demand for sustainable manufacturing solutions.

In summary, Bloomfield 9104A and 9102A represent the next generation of manufacturing equipment, equipped with advanced technologies that enhance operational efficiency, versatility, and sustainability. Their unique features and robust designs make them valuable assets for any industrial operation, paving the way for future innovations in the manufacturing sector.