Bloomfield 9102A, 9104A owner manual Procedure Delime the Water Tank, Chemical Burn Hazard

Page 18

SERVICING INSTRUCTIONS (continued)

CAUTION:

CHEMICAL BURN

HAZARD

Deliming chemicals are caustic. Wear appropriate protective gloves and goggles during this procedure.

Never siphon deliming chemicals or solutions by

mouth.

This operation should only be performed by qualified and ex- perienced service personnel.

IMPORTANT: DO NOT spill, splash or pour water or deliming solution into or over any internal component other than the inside of the water tank.

IMPORTANT: DO NOT allow any internal components to come into contact with the deliming solution. Take care to keep all internal components dry.

NOTE: Repeat steps 4 and 7 as required to remove all build- up.

PROCEDURE: Delime the Water Tank

PRECAUTIONS: Disconnect brewer from electric power.

 

Allow brewer to cool.

FREQUENCY:

As required (Brewer slow to heat)

TOOLS:

Deliming Solution

 

Protective Gloves, Goggles & Apron

 

Mild Detergent, Clean Soft Cloth or Sponge

 

Bristle Brush, Bottle Brush

 

Large Sink (or other appropriate work area)

1.Disconnect brewer from the electrical supply.

2.Remove the brewer top panel, then remove the tank lid assembly. Do not disconnect the tank assembly at this time.

3.Siphon all water from the hot water tank.

4.Mix 2 gallons of deliming solution according to the manufacturer’s directions. Carefully pour the deliming solution into the water tank. Lower the lid assembly back onto the tank. Allow to sit for 30 minutes, or as directed by the chemical manufacturer.

5.At end of soaking period, reconnect brewer to electrical power. Install the brew chamber without filter paper or grounds. Place an empty satellite under the brew chamber. Force a 1-1/2 gallon brew:

a.Press the 1-1/2 gallon key

b.Press the brew key, then press and hold the brew key

until a brew is initiated.

Empty the satellite and repeat for the other side.

6.Disconnect brewer from electrical power and allow to cool.

7.Remove lid assembly from tank.

a.Using a stiff bristle brush, scrub internal components to remove lime and calcium build-up.

b.Thoroughly rinse internal components of lid assembly with clear water.

c.Store lid assembly in a safe location.

8.Using a stiff bristle brush, scrub exposed portions of the heating element and the inside surfaces of the tank to remove lime and calcium build-up.

9.Siphon all solution from the tank.

663 76061 Owners Manual for 9102A Single Satellite Brewer

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents For WithWarranty Statement Table of Contents SpecificationsFeatures and Operating Controls Brew Chamber BrewerControl Panel SatelliteGeneral Information and Precautions Burn HazardAgency Approval Information PLUMBER’S Installation Instructions Installation InstructionsInstall Legs Level the UnitELECTRICIAN’S Installation Instructions Initial SET-UP InstructionsOperating Instructions Brewing CoffeeBrew & Bypass HOT Water FaucetProcedure Clean Coffee Brewer Cleaning InstructionsCleaning Instructions Procedure Clean SatelliteTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyAccess Panels Servicing InstructionsTemperature Adjustment Brew Timer Adjustment Bypass Adjustment 9104A only Procedure Delime the Water Tank Chemical Burn HazardServicing Instructions Exploded View Electrical Components Cabinet & Related Components Satellite Assembly 9105SS Service Kits Faucet Repair KitsWiring Diagrams Telephone Fax For orders only

9104A, 9102A specifications

Bloomfield 9104A and 9102A are two latest innovations in the realm of advanced manufacturing equipment, specifically designed for high efficiency and precision in various industrial applications. These models stand out due to their unique features, state-of-the-art technologies, and robust characteristics, making them suitable for both small-scale operations and large industrial setups.

The Bloomfield 9104A is tailored for a wide array of applications, offering improved performance metrics compared to its predecessors. One of its standout features is the enhanced processing speed, which reduces production time significantly. This is largely due to its advanced control system, which integrates real-time data analytics and machine learning algorithms. This enables predictive maintenance, minimizing downtime and ensuring smoother operational flow.

On the other hand, the Bloomfield 9102A is optimized for versatility and user-friendliness. It boasts an intuitive interface that allows operators to adjust settings with ease, enhancing overall productivity. The unit is designed to handle a variety of materials, demonstrating its flexibility in manufacturing processes. Its compact design does not compromise performance, making it ideal for facilities with limited space.

Both models employ cutting-edge technologies that cater to modern manufacturing requirements. The inclusion of IoT connectivity allows for seamless integration into smart factories. This feature enables remote monitoring and control, as well as the capability to gather performance data for further analysis and optimization.

As for characteristics, durability and reliability are key aspects of both models. Built with high-quality materials and components, they are designed to withstand the rigors of continuous operation. Additionally, the energy-efficient designs contribute to lower operational costs and a reduced carbon footprint, fulfilling the growing demand for sustainable manufacturing solutions.

In summary, Bloomfield 9104A and 9102A represent the next generation of manufacturing equipment, equipped with advanced technologies that enhance operational efficiency, versatility, and sustainability. Their unique features and robust designs make them valuable assets for any industrial operation, paving the way for future innovations in the manufacturing sector.
Top Page Image Contents