Bloomfield 8372 owner manual Warranty Statement, Shipping Damage Claims Procedure

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by BLOOMFIELD INDUSTRIES is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD INDUSTRIES DIVISION / SPECIALTY EQUIPMENT MANUFACTURING CORPORATION SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Industries Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transportation charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Bloomfield Industries

P.O. Box 280

Verdi, NV 89439

 

Phone: (775) 689-5700

Fax: (888) 492-2783

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates—conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non-warranted equipment.

Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

SHIPPING DAMAGE CLAIMS PROCEDURE

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory. Upon accep- tance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Bloomfield Industries cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

xi

Image 2
Contents Model Warranty Statement Shipping Damage Claims ProcedureModel Style Volts Watts Amps Power Supply Cord Table of ContentsSpecifications Features and Operating Controls Burn Hazard Precautions and General InformationElectrical Damage Agency Approval InformationEquipment Hazard Installation InstructionsELECTRICIAN’S Installation Instructions Leveling the UnitPersonal Injury START-UPOperation Automatic Operation HOT Water FaucetBrewing Coffee PreparationCleaning Instructions Electric Shock HazardProcedure Clean and Sanitize Basin Pan Electric ShockTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyServicing Instructions Access PanelsTemperature Adjustment Replace Thermostat Timer AdjustmentRemove Tank LID Assembly Replace Heating Element Replace Timer AssemblyReplace Brew Ready LIGHT, Brew Switch or Warmer Switch Replace Warmer ElementProcedure Delime the Water Tank Servicing Instructions Exploded View & Parts List Plumbing ComponentsExploded View & Parts List PART# Description QTY Wiring Diagram Telephone Fax

8372 specifications

Bloomfield 8372 is a notable player in the realm of advanced technological systems, specifically tailored for diverse industrial applications. This model exemplifies cutting-edge design and engineering, ensuring it remains at the forefront of innovation.

One of the standout features of the Bloomfield 8372 is its robust construction. Built with high-grade materials, this model ensures durability and longevity, making it suitable for even the most demanding environments. It is designed to withstand significant wear and tear while maintaining a high level of performance, which is essential in commercial settings where efficiency is paramount.

In terms of technology, the Bloomfield 8372 incorporates state-of-the-art automation features. This enables seamless integration with existing workflows, reducing manual intervention and minimizing the risk of human error. The automation capabilities include sophisticated controls and smart sensors that monitor performance in real-time, providing valuable insights for optimal operation. Users can expect enhanced precision in tasks, leading to improved productivity.

Another significant characteristic of Bloomfield 8372 is its user-friendly interface. The intuitive design allows operators to navigate the system effortlessly, ensuring quick adaptation and ease of use irrespective of technical expertise. The interface also provides comprehensive data visualizations, empowering users to make informed decisions based on real-time analytics.

Energy efficiency is a critical consideration in modern equipment design, and Bloomfield 8372 excels in this domain. By utilizing advanced energy-saving technologies, this model not only reduces operational costs but also aligns with sustainability goals. It is engineered to consume less power while delivering maximum output, making it an eco-friendly choice for organizations looking to minimize their carbon footprint.

Moreover, the Bloomfield 8372 is highly versatile. It can be customized to meet specific customer requirements, making it suitable for a wide array of applications. Whether it's in the food service industry, manufacturing, or healthcare, this model adapts to varying needs, providing tailored solutions without compromising on performance.

In conclusion, the Bloomfield 8372 stands out for its combination of durability, advanced automation, user-friendly design, energy efficiency, and versatility. These characteristics make it a reliable choice for businesses aiming to enhance operational efficiency while adhering to modern technological standards. As industries continue to evolve, models like the Bloomfield 8372 will undoubtedly play a crucial role in shaping the future of industrial practices.