Bloomfield 0472, 0412, 0443, 0471, 0482 Procedure Delime the Water Tank, Chemical Burn Hazard

Page 19

SERVICING INSTRUCTIONS (continued)

685 77110 Owners Manual Horizon™ Brewers

PROCEDURE: Delime the Water Tank

PRECAUTIONS:

Disconnect brewer from electric power.

 

Allow brewer to cool.

FREQUENCY:

As required (Brewer slow to heat)

TOOLS:

Deliming Solution

 

Protective Gloves, Goggles & Apron

 

Mild Detergent, Clean Soft Cloth or Sponge

 

Bristle Brush, Bottle Brush

 

Large Sink (or other appropriate work area)

1.Disconnect brewer from electric power. For automatic brewers, turn off the water shut-off valve and disconnect the water supply line from the brewer inlet fitting.

2.Remove the tank lid assembly as described on page 14.

3.Remove the water tank from the brewer body by lifting straight up. Empty all water from the tank. Set the tank back into the brewer.

4.Mix 2 quarts of deliming solution according to the manufacturer’s directions. Carefully pour the deliming solution into the water tank. Lower the lid assembly back onto the tank. Allow to sit for 30 minutes, or as directed by the manufacturer.

5.At end of soaking period, remove lid assembly from tank. Thoroughly rinse internal components of lid assembly with clear water. Using a stiff bristle brush, scrub the heating element (and faucet water coil on automatic brewers) to remove lime and calcium build-up. Rinse with clean water. Store lid assembly in a safe location .

6.Remove the tank from the brewer and empty. Using a stiff bristle brush, scrub the interior of the water tank to remove lime and calcium build-up. Rinse with clean water.

7.Set the tank back into the brewer. Reassemble the tank lid to the water tank. Make sure the gasket is properly in place, then reinstall the hold-down strap.

8.Reinstall wiring to heating element and thermostat. Reinstall the hi-limit thermostat (if removed). For automatic brewers, reassemble piping for the faucet. Verify that all internal components are dry, then reinstall the top panel.

10.Reconnect brewer to electrical supply and, for automatic brewers, reconnect water supply.

11.Install the brew chamber without filter paper or grounds. Run at least three full brew cycles and discard all water generated.

12.Brewer is ready to use.

CAUTION:

CHEMICAL BURN

HAZARD

Deliming chemicals may be caustic. Wear appropriate protective gloves and goggles during this procedure.

Never siphon deliming chemicals or solutions by

mouth.

This operation should only be performed by qualified and experienced service personnel.

IMPORTANT: DO NOT spill, splash or pour water or deliming solution into or over any internal component other than the inside of the water tank.

IMPORTANT: DO NOT allow any internal components to come into contact with the deliming solution. Take care to keep all internal components dry.

NOTE: Repeat steps 4 thru 5 as required to remove all scale and lime build-up.

NOTE: Normally, silicone hoses do not need to be delimed. Should deliming hoses become necessary, Bloomfield recommends replacing the hoses.

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 685 Warranty Statement Specifications Table of ContentsApplicability Features and Operating Controls Automatic Brewers Features and Operating Controls POUR-OVER Brewers Burn Hazard Precautions and General InformationAgency Listing Information Electrical DamageLeveling the Unit InstallationUnstable Equipment Hazard Water Supply Installation PLUMBER’S Installation Instructions Automatic BrewersShock Hazard ELECTRICIAN’S Installation InstructionsSTART-UP OperationPreparation Brewing CoffeePrepare for Next Brew Procedure Clean Coffee Brewer Cleaning InstructionsSymptom Possible Cause Suggested Remedy Troubleshooting SuggestionsServicing Instructions Access PanelsShock Hazard Warmer Plates Servicing Instructions Temperature AdjustmentReplace Heating Element Timer Adjustment Automatic Brewers onlyRemove Tank LID Assembly Replace Thermostat CothermReplace Solenoid Clean Solenoid ScreenReplace HOT Water Faucet Coil Replace Timer AssemblyRepair HOT Water Faucet Chemical Burn Hazard Procedure Delime the Water TankExploded View & Parts List Exploded View & Parts List Exploded View & Parts List Exploded View & Parts List Exploded View & Parts List Exploded View & Parts List Exploded View & Parts List Faucet Repair Kits Service KitsWiring Diagram Wiring Diagram Telephone Fax

0472, 0482, 0471, 0443, 0412 specifications

Bloomfield, a prominent urban area within Australia, is recognized for its unique postcode identifiers: 0482, 0412, 0471, 0472, and 0443. Each of these postcodes represents dynamic regions that showcase a blend of historical significance and modern advancement, making Bloomfield a vibrant place to live and visit.

At the heart of Bloomfield lies a robust infrastructure that supports both residential and commercial activities. The area is characterized by its extensive green spaces, parks, and recreational facilities, catering to families and individuals alike. Bloomfield's commitment to sustainability is evident in its well-maintained gardens and tree-lined streets, promoting an eco-friendly environment.

Technologically, Bloomfield stands out with its integration of smart technology in urban management. From automated waste collection systems to smart lighting solutions, the city is leveraging technology to enhance the quality of life for its residents. High-speed internet connectivity is widely available, contributing to the growth of the local economy and attracting remote workers and tech startups.

Bloomfield is also renowned for its diverse community, which enhances its cultural landscape. Various community events throughout the year celebrate this diversity, bringing together people from different backgrounds to share their traditions, foods, and arts. The local markets offer an array of artisanal products and fresh produce, highlighting Bloomfield's focus on supporting local businesses and fostering community engagement.

Education plays a crucial role in Bloomfield's development, with several reputable schools and educational institutions located within its borders. The area is not only focused on academic excellence but also emphasizes holistic development, with various extracurricular programs available for students.

Transportation in Bloomfield is well-organized, featuring efficient public transport options that connect residents to neighboring areas and the city center. This accessibility facilitates a seamless commute, making Bloomfield an attractive option for those seeking a balance between suburban serenity and urban convenience.

In summary, Bloomfield 0482, 0412, 0471, 0472, and 0443 exemplify a thriving community that marries tradition with innovation. Its array of features, advanced technologies, and strong sense of community position it as a desirable location for both residents and visitors. As Bloomfield continues to evolve, it remains dedicated to enhancing the quality of life for those who call it home.
Top Page Image Contents