Bravetti EP114H Citrus Juice Filter, Speed Control Dial, Using The Double Chopping Blade

Fig. 3

Fig. 13

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Citrus Juice Filter (cont.)

4.Insert the juice reamer into the center of the citrus juice filter with its shaft inside the central column of

the bowl. (Fig. 13)

5. Plug in the appliance.

6.	Place fruit on juice
	reamer and hold with
	a cupped hand.
7.	Operate at minimum speed.
	WARNING: Always operate the
	juicer at minimum speed only.
	Do not operate the citrus juicer at

Fig. 14 Fig. 15

Speed Control Dial

The food processor speed control dial has two speeds settings plus "Pulse" and "Turbo".

1 - Low

2 - High

The speed can be adjusted while the food processor is in use.

Use of the Pulse/Turbo button allows greater control over the texture of the food being processed. Use "Pulse" when the unit is in the "Off" position. Use "Turbo" when the unit is in the "On" position and you need a burst of power.

4.Now you are ready to use any of the attachments that come with the unit; i.e. the double chopping blade, dough blade, etc.

Using The Double Chopping Blade

Always disconnect unit from power source before cleaning or changing accessories.

WARNING: USE EXTREME CAUTION WHEN HANDLING THE

BLADES. THEY ARE EXTREMELY SHARP. Always remove protective bade cover(s) before using.

higher speeds.

Slicing & Shredding Blades

CAUTION: Make sure that the unit is unplugged from the power

source and the speed control dial is in the “OFF” position before inserting or removing attachments.

1.	Place the blade of your choice on
	the blade holder. Inserting the longer
	tab on the side of the blade first.
	(Fig. 14)
2.	Press the other end of the blade until
	it clicks into place. (Fig. 15)
3.	Fit the processor bowl and spindle

Fig. 16

French Fry Blade Assembly

CAUTION: Make sure that the unit is unplugged from the power

source and the speed control dial is in the “OFF” position before inserting or removing attachments.

Note: The French Fry Blade is already assembled to the blade holder. Do not try to remove it. (Fig. 17)

1.	Fit the processor bowl and spindle
	as detailed previously.
2.	Using the finger holes in the French
	Fry blade holder, fit it over the
	spindle and press firmly into place as

Please note that the "Pulse" and "Turbo" is only intended to be used for short "bursts" of processing.

Operating the Food Processor

Setting up:

1.	CAUTION: Make sure that the unit is
	unplugged from the power source and
	the the Speed control dial is in the
	"Off" position before inserting or
	removing any attachments and before
	cleaning.
2.	Place the food processor bowl onto
	the processor body. There is no need
	to turn the bowl. (Fig. 1)
3.	When fitted correctly, the handle will

The double chopping blade may be used with one blade or with

two blades.

1.To use as a double blade, carefully slip the separate blade over the shaft of the main blade. (Fig. 3 & Fig. 4)

Double Main Blade Blade

as detailed on the page 4.

4. Using the finger holes in the blade

holder, fit it over the spindle and

press firmly into place as indicated.

(Fig. 16)

WARNING: USE EXTREME

CAUTION WHEN HANDLING

BLADES. BLADES ARE SHARP.

5. Fit the lid and click into place as

described in the Setting Up section

indicated. (Fig. 18)

WARNING: USE EXTREME

CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP.

4.	Fit the lid and click into place as
	indicated in Setting Up section
	(page 4).
5.	Plug in the processor.
	WARNING: USE THE FOOD
	PUSHER TO ADD FOOD INTO THE
	PROCESSOR BOWL THROUGH
	THE FEEDER TUBE.

be to the right of the assembly, and

the ridge on the base of the bowl will

fit into the slot at the back of the

processor body. (Fig. 2)

Fig. 4

Two Blades Together

2.Then insert onto the shaft of the processor bowl. Always hold the chopping blade by the upper plastic part. (Fig. 5)

(page 4).

6. Plug in the processor.

WARNING: USE THE FOOD

PUSHER TO ADD FOOD INTO

THE PROCESSOR BOWL THROUGH THE FEEDER TUBE.

Do not overload the food processor bowl. In one operation, you can process a maximum of 6 cups (1500 ml) of food.

Do not overload the bowl. In one

operation, you can process a

maximum 6 cups (1500 ml) of food.

Fig. 18

Fig. 17

7

Fig. 1

Fig. 2 Fig. 5

4