Operating Instructions
Operating Instructions
WARNING: USE THE FOOD PUSHER TO ADD FOOD INTO THE PROCESSOR BOWL THROUGH THE FEEDER TUBE.
7.Do not overload the food processor bowl. In one operation, you can process a maximum of 5 cups (1250mL) of food.
French Fry Blade Assembly
Caution: Make sure that the unit is unplugged from the power source and the swivel head is in the “Off” position before inserting or removing attachments.
Caution: Do not operate the unit for intervals longer than 20 seconds. If longer chopping or mixing is required, run for 20 seconds, allow the motor to stop and run again for another 20 seconds.
The French Fry blade (G) may already be assembled onto the French Fry blade holder. (Marked as Fry Blade Holder.)
Note: The French Fry blade will only fit into the French Fry blade holder; identified by the higher hub.
1.Place the spindle into the food processor bowl.
2.Using the finger holes in the French fry blade holder, fit it over the spindle and press firmly into place. (Fig. 15)
G | Higher |
Fry Blade | |
| Hub |
Fig. 15
WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP.
3.Place the lid on the food processor bowl, and lock the swivel head into position.
4.Plug in the processor.
WARNING: USE THE FOOD PUSHER TO ADD FOOD INTO THE PROCESSOR BOWL THROUGH THE FEEDER TUBE.
5.Do not overload the bowl. In one operation, you can process a maximum 5 cups (1250 ml) of food.
Processing Examples
Recommended speed for processing with chopping blades is High.
A |
| Thin Shredding |
| (carrots, potatoes, | |
|
| cucumbers, cabbage) |
|
|
|
B |
| Thick Shredding |
| (Lettuce, carrots, onions) | |
|
|
|
C |
| Thick Slicing |
| (Cabbage, carrots, | |
|
| onions) |
|
|
|
D |
| Thin Slicing |
| (Carrots, cucumbers, raw | |
|
| potatoes, lettuce) |
|
|
|
E |
| Grating |
| (Hard Cheeses) | |
|
|
|
F |
| Julienne |
| (Vegetables) | |
|
|
|
G |
| French Fry |
| (Potatoes) | |
|
|
|
Hints & Tips for French Fry, Shredding, Slicing, Grating & Julienne Blades
•For shredding, place food horizontally into the feeder tube.
•For slicing place the food vertically.
•If grating potatoes or apples, add 1 tsp lemon juice to prevent them from turning black.
•Potatoes can be sliced using the thin slicing blade for chips or use the large French Fry blade if making French fries.
6.Turn the swivel head clockwise until it stops turning and push down until it “clicks” into place. (Fig. 6)
Unlocked Position | Locked Position |
Fig. 6
7.Plug in the processor and turn the speed control dial to the desired speed. If the processor does not come on, check that the swivel head and processor lid are both correctly fitted and locked into place. For safety, always use the food pusher when putting food into the feeder tube. NEVER feed by hand. (Fig. 7)
Fig. 7
Important: The food processor has a swivel head system. It cannot run unless the swivel head is locked. The swivel head cannot be opened unless the On/Off knob is turned to the “Off” position.
Using the Double Chopping Blade
Always disconnect unit from power source before cleaning or changing accessories.
Warning: USE EXTREME CAUTION WHEN HANDLING THE BLADES. THEY ARE EXTREMELY SHARP. ALWAYS remove the chopping blade protective guards before using.
Important Note: Do NOT operate continuously for more than 20 seconds at one time.
The food processor may be used with one blade or two blades, depending on type of food, finer chopping results, or speed of processing. (Fig. 8)
| Spindle |
Double | Main |
Blade | |
Blade |
|
Fig. 8
1.To open the food processor, ensure that the speed control dial is in the “Off” position and press the swivel head release button. (Fig. 9)
Fig. 9
2.To use with a double blade, carefully slip the first blade onto the spindle. Hold this blade by the base. Hold second blade from top grip and place second blade on top of first. Turn second blade clockwise to lock into position. (Fig. 10)
Fig. 10
3.Then place the blade assembly onto the shaft of the processor bowl. Always hold the chopping blade assembly by the top of the spindle.
8
5