3.Installing the “Control Panel With the Heating Element (#5)” Into its Place
•Lift up the “Control Panel with Heating Element” (#5).
•Slide the “Guide Edges” on the Control Panel (#5) into the “Guide Rails” mounted on the metal body (#1).
•Slide the “Guide Edges” down till the end.
Important Notice: The Automatic Safety Switch ensures that the unit will not operate unless the Control Panel (#5) has been inserted into the “Guide Rails” on the metal body (#1) correctly.
Guide Rails
Guide
Edges
Heating
Element
Safety Switch
Back of Main Body (#1)
Control Panel (#5)
6