Energy Saving Tips, Something Not Working | AEG G 8 88 50 I instruction

Energy Saving Tips

•Do not install the appliance near radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent opera- tion of the compressor.

•Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings.

•Do not place warm foods into the appliance. Allow warm foods to cool first.

•Only leave door open as long as necessary.

•Do not set temperature any colder than necessary.

•Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Something Not Working

If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Warning!

Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.

3.Place frozen foods in the drawers sorted by type, as far as possible.

Preparation of Ice Cubes

1.Fill the ice cube tray 3/4 full with cold water, place it in the freezer com- partment and leave to freeze.

2.To loosen the frozen cubes, either twist the ice cube tray or hold it under running water for a few seconds.

Important! Never try to free an ice tray that is frozen to the freezer com- partment using pointed or sharp edged objects. Use the ice scraper supplied.

Frozen Food Symbols/Freezing Calendar

•The symbols on the drawers show different types of frozen goods.

•The numbers indicate storage times

in months for the appropriate types of frozen goods. Whether the upper or lower value of the indicated storage time is valid depends on the quality of the foods and pre-treating before freezing. The lower value applies to foods with high fat content.

• By attaching the included index-tabs to the drawers, they can be marked

according to which type of foods the individual compartments contain.

Appliance does not work no pilot light is illuminated.

Green light does not light up, yellow light lights up when fast freeze fuction is activa- ted, appliance is on.

Yellow light does not light up, when fast freeze fuction is activated, appliance is on.

Appliance cools too much.

Appliance is not switched on

Mains plug is not plugged in or is loose.

Fuse has blown or is defective.

Socket is defective.

Green light faulty.

Yellow light faulty.

Temperature is set too cold.

Switch on the appliance.

Insert mains plug.

Check fuse, replace if neces- sary.

Mains malfunctions are to be corrected by an electrician.

Please inform your local AEG Service Force Centre

Press the temperature setting button to a warmer setting.

Defrosting

The freezer will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 4 mm. During this operation it is not necessary to swit- ch off the power supply or to remove the foodstuffs.

However when the ice becomes very thick on the inner liner, complete defrosting should be carried out as follows:

G 8 88 50 I specifications

The AEG G 8 88 50 I is a remarkable piece of engineering that showcases the long history of innovation at AEG (Allgemeine Elektricitäts-Gesellschaft). This model is designed to meet the needs of modern consumers who demand efficiency, reliability, and advanced technological features in their appliances.

At its core, the AEG G 8 88 50 I is a high-performance washing machine distinguished by its intelligent design and user-centric functionalities. With a sleek and contemporary appearance, it seamlessly integrates into any modern laundry space while enhancing the aesthetic of the surroundings. The build quality is robust, ensuring longevity and consistent performance.

One of the main features of the G 8 88 50 I is its impressive load capacity. With the ability to handle large loads, this washing machine caters to families and busy households, reducing the number of laundry cycles required. This efficiency not only saves time but also optimizes water and energy consumption, aligning with contemporary sustainability goals.

Equipped with AEG's patented ProSteam technology, this model helps to minimize wrinkles and reduce ironing. This feature is especially appealing to consumers who want to save time in their daily routines. Additionally, the machine utilizes a unique sensor system called SensiDry, which ensures that clothes are dried gently and evenly, leaving them soft and fresh without the risk of over-drying.

The AEG G 8 88 50 I also boasts a variety of wash programs tailored to different fabric types and user preferences. Whether it's delicate silk or robust cotton, the machine's versatile settings cater to all clothing needs while providing optimal care for garments. Notably, the Quick Wash program allows users to clean lightly soiled items in a fraction of the usual time, enhancing convenience.

Another characteristic that stands out is the inverter motor, which operates quietly while delivering powerful performance. This motor technology extends the lifespan of the appliance and reduces energy consumption, making the G 8 88 50 I an eco-friendly choice for environmentally conscious consumers.

In conclusion, the AEG G 8 88 50 I combines advanced technology with thoughtful design, creating an appliance that meets the diverse needs of users. Its key features, such as ProSteam and SensiDry technologies, large capacity, and energy efficiency, make it a top contender in the competitive landscape of washing machines, solidifying AEG's reputation for quality and innovation in home appliances.