AEG G 8 88 50 I Remove transport packaging, Disposal of old Appliances, Positioning

Page 6

Disposal of old Appliances

For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of its service life - to your new appliance as well.

Warning! Before disposing of old appliances make them inoperable. Remove plug from mains, sever the power cable, remove or destroy any snap or latch closures, to prevent small children being trapped inside.

•Contact your local Council or Environmental Health Office to see if there are facilities in your area to recycle the appliance.

Remove transport packaging

The appliance and the interior fittings are protected for transport.

•Remove all adhesive tape and packing pieces from the interior of the appliance.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rat- ing plate, which is located on the inside left of the appliance.

The following table shows which ambient temperature is correct for each climate classification.

Climate classification

 

for an ambient temperature of

 

 

 

 

 

 

SN

 

+10 to +32 °C

 

 

 

N

 

+16 to +32 °C

 

 

 

The appliance should be located in a dry atmosphere, out of direct sunlight and away from continuous heat and extreme temperature, e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse. If these tem- peratures are exceeded i.e. warmer or colder, then the appliance may not operate correctly.

For building-in and door reversal instructions please refer to the relevant instructions.

Your appliance needs air

For safety reasons, minimum ventilation must be as shown Fig.

Attention: keep ventilation openings clear of obstruction;

50

 

556

542

880

 

560 min.

 

873

 

6

19

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Arctis G 8 88 50 AEG Hausgeräte GmbH Postfach 90327 Nürnberg 2222Dear customer Contents Intended use SafetySafety of children Prior to initial start-upDisposal ServiceRegulations, Standards, Guidelines Daily OperationPositioning Remove transport packagingDisposal of old Appliances Your appliance needs airTemperature setting buttons InstallationOperating and indicator panel Electrical ConnectionGuarantee Conditions Guarantee ConditionsTemperature display When to use the Frostmatic function0870 5 Service and Spare PartsStarting up and temperature regulation Customer Care DepartmentFreezing and storing frozen food Something Not Working Frozen Food Symbols/Freezing CalendarEnergy Saving Tips Preparation of Ice CubesSwitching off the appliance Cleaning and Care

G 8 88 50 I specifications

The AEG G 8 88 50 I is a remarkable piece of engineering that showcases the long history of innovation at AEG (Allgemeine Elektricitäts-Gesellschaft). This model is designed to meet the needs of modern consumers who demand efficiency, reliability, and advanced technological features in their appliances.

At its core, the AEG G 8 88 50 I is a high-performance washing machine distinguished by its intelligent design and user-centric functionalities. With a sleek and contemporary appearance, it seamlessly integrates into any modern laundry space while enhancing the aesthetic of the surroundings. The build quality is robust, ensuring longevity and consistent performance.

One of the main features of the G 8 88 50 I is its impressive load capacity. With the ability to handle large loads, this washing machine caters to families and busy households, reducing the number of laundry cycles required. This efficiency not only saves time but also optimizes water and energy consumption, aligning with contemporary sustainability goals.

Equipped with AEG's patented ProSteam technology, this model helps to minimize wrinkles and reduce ironing. This feature is especially appealing to consumers who want to save time in their daily routines. Additionally, the machine utilizes a unique sensor system called SensiDry, which ensures that clothes are dried gently and evenly, leaving them soft and fresh without the risk of over-drying.

The AEG G 8 88 50 I also boasts a variety of wash programs tailored to different fabric types and user preferences. Whether it's delicate silk or robust cotton, the machine's versatile settings cater to all clothing needs while providing optimal care for garments. Notably, the Quick Wash program allows users to clean lightly soiled items in a fraction of the usual time, enhancing convenience.

Another characteristic that stands out is the inverter motor, which operates quietly while delivering powerful performance. This motor technology extends the lifespan of the appliance and reduces energy consumption, making the G 8 88 50 I an eco-friendly choice for environmentally conscious consumers.

In conclusion, the AEG G 8 88 50 I combines advanced technology with thoughtful design, creating an appliance that meets the diverse needs of users. Its key features, such as ProSteam and SensiDry technologies, large capacity, and energy efficiency, make it a top contender in the competitive landscape of washing machines, solidifying AEG's reputation for quality and innovation in home appliances.
Top Page Image Contents