AEG 80850 I manual Adjusting Rinse Aid Dosing

Page 15

 

Operating Instructions

 

Adjusting Rinse Aid Dosing

3

As the dishes are washed rinse aid is released from the dispenser into

 

the wash water. The dose is factory set at 4, and can be adjusted from

1 to 6. Only change the setting if streaks, milky spots or dried on water marks are visible on glasses or crockery.

0 1. Open the door of the dishwasher.

2.Press the rinse aid compartment release button with your finger.

3. Fully open the rinse aid compartment lid.

4. Set the dose level.

5. Close the lid and press until it locks into place.

6.If rinse aid has run out, wipe up with a cloth.

Setting the Signal Tone for the End of the Wash Pro- gramme

You can set whether, in addition to the optical indication of the end of the programme, a signal tone is also to be heard.

0 1. The dishwasher must be switched off.

2.Press the signal tone and water softener buttons simultaneously and keep them pressed.

3.Press the ON/OFF switch. The LED indicators for the signal tone and water softener buttons flash.

4.Press the signal tone button again.

The multi-display indicates the current setting:

b0

Signal tone switched off

b1

Signal tone switched on (factory setting)

 

 

5.Pressing the signal tone button changes the setting.

6.Once the multi-display indicates the required setting, press the ON/OFF switch. The setting is then saved.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Ökofavorit 80850 Use of the appliance are marked with a clover leaf Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety Correct Use General SafetyPOM For polyoxymethylene, e.g. plastic clips DisposalDisposing of the Packaging Material Disposal of old appliancesEconomical and Ecological Dishwashing Appliance Features and Control Panel Multi-Display can display Control PanelHardness range of the water in your area Prior to using for the first timeAdjusting the Water Softener Special saltTurning it anticlockwise Filling with Special Salt for the Water SoftenerFill with special salt Use special salt Open the door, remove the lower RackOperating Instructions Fill with rinse aid Filling with Rinse AidThat you glasses are clear Would damage the applianceSetting the Signal Tone for the End of the Wash Pro- gramme Adjusting Rinse Aid DosingFor washing in the dishwasher the following cutlery/dishes Daily UseLoading cutlery and dishes Not be washed in the dishwasherLoading Cutlery To avoid damage to glasses, they must not touchDo not lay small objects e.g. lids in the cutlery rack Work surface If you use the grid insert, it is notTo ensure that the cutlery basket Both parts of the two part handleLoad large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans Large PlatesLoading Cups, Glasses and Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Type Lowering the Upper BasketFill with detergent Filling with DetergentAutomatic Wash Programmes Bio Wash Programmes and Concentrated DetergentsSelecting the Wash Programme Programme Table Soiling SuitableSequence Starting the Wash Programme GrammeChanging the wash programme Pause Function Setting or Changing the Start Delay TimerCancelling the wash programme Setting the start delay timerEmptying the Dishwasher Switching Off the DishwasherChanging the start delay Load Sensing Sensor LogicCleaning the Filter Care and CleaningUnder no circumstances may Fault messages are displayed What to do, whenMalfunction Possible Cause Remedy Open the door carefully Wrong wash programme was selected There are problems with the operation of the dish- washerWash result is not satisfactory Dishes are still dirtyDecrease rinse aid dosing Drain hose is incorrectly laidDishes are wet and dull Rinse aid was not used Rinse aid container is emptyDishwasher Free-Standing Appliances Dishwashers that Can Be Integrated, Built-In DishwashersDishwashers that Can Be Fully Integrated Sample loading arrangements Upper basket without cutlery trayLower basket with cutlery basket Cutlery basket Installing the Dishwasher Installation and Connection InstructionsDishwashers That Can Be Integrated Built-In DishwasherFree-Standing Appliances Fitted with a décor panel to match Plinth on free-standing appliances is not adjustableWork surface must be re-mounted Free-standing appliances can beConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureSink outlet connection Water drainDrain hose Extension hosesLeak Prevention System Electrical connectionAppliance is automatically pumped out Connections Croatia New Zealand E. Abu Dhabi Jordan MaltaEgypt Kanada Mauritius Australia Korea South NamibiaIsrael Malaysia Saudi Arabia Cyprus Lebanon OmanEstonia Latavia Poland Hongkong Lthuania RussiaOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandService AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

80850 I specifications

The AEG 80850 I is an innovative and powerful kitchen appliance that brings efficiency and versatility to meal preparation. Designed with modern home cooks in mind, this induction hob stands out for its sleek design, user-friendly features, and advanced cooking technologies.

One of the main features of the AEG 80850 I is its induction cooking technology. Induction hobs use electromagnetic fields to directly heat the cookware, providing rapid heating and precise temperature control. This not only reduces cooking times but also enhances energy efficiency, as the heat is focused directly on the pan rather than the surrounding area. The result is a quicker and more economical cooking experience.

The AEG 80850 I offers a spacious cooking surface, accommodating multiple pots and pans simultaneously. With several cooking zones of varying sizes, users can easily tailor their cooking setup to suit different meals. The hob includes features like a large diameter zone for larger cookware, ensuring optimal use of the available space.

In addition, the AEG 80850 I features a boost function for each cooking zone. This allows for an intense burst of heat, ideal for boiling water quickly or searing meat at high temperatures. Once the desired temperature is reached, the hob automatically adjusts back to the selected cooking level, promoting convenience and preventing overcooking.

Safety is a priority with the AEG 80850 I. The appliance is equipped with features such as a child lock, ensuring that the hob cannot be accidentally turned on by young children. Moreover, the residual heat indicators provide a visual cue when a cooking zone is still hot, reducing the risk of burns.

The design of the AEG 80850 I is both modern and functional. The flat surface is easy to clean, as spills do not get trapped beneath burners. Its minimalist aesthetic makes it a stylish addition to any kitchen.

Moreover, the AEG 80850 I features a touch control panel for easy operation. Users can seamlessly adjust settings and temperatures with intuitive controls, allowing for a stress-free cooking experience.

Overall, the AEG 80850 I is a sophisticated induction hob that combines cutting-edge technology with stylish design and user-friendly features. Its rapid heating capability, safety features, and easy cleaning make it a must-have for any contemporary kitchen. Whether you are a novice cook or a seasoned chef, this induction hob is designed to enhance your cooking experience and deliver delicious results.
Top Page Image Contents