AEG 80850 I Work surface must be re-mounted, Plinth on free-standing appliances is not adjustable

Page 39

Installation and Connection Instructions

•If the dishwasher is installed under- neath a kitchen work surface, the original work surface of the dish- washer is to be removed as follows:

–Unscrew the screws (1) from the elbows on the back side.

–Slide the work surface approx. 1cm to the rear (2) , lift at the front (3) and remove.

–Press the work surface retaining brackets at the position shown in the diagram (4) and remove the bracket at an angle to the rear

(5).

4

5

1

If the dishwasher is later used as a free-standing appliance, the original

 

work surface must be re-mounted.

3 The plinth on free-standing appliances is not adjustable.

 

• Free-standing appliances can be

 

fitted with a décor panel to match

 

the facings of other kitchen equip-

 

ment. The décor panels must be

 

 

 

 

 

obtained from the kitchen manu-

 

 

 

 

 

 

 

 

 

 

 

 

 

facturer. A décor frame is necessary

 

for installation, and can be

 

 

 

 

 

 

obtained as an accessory from the

 

 

 

 

 

dealer if not included in the scope

 

 

 

 

 

 

 

of delivery.

 

 

 

 

 

 

 

 

 

 

 

 

• Decor panel dimensions:

– Height 590 mm

–Width 581 mm

–Clamp thickness: max. 4 mm

•To ensure that thin decor panels do not flex or distort, attach them to the door of the appliance using double sided adhesive tape.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Ökofavorit 80850 Use of the appliance are marked with a clover leaf Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety Correct Use General SafetyPOM For polyoxymethylene, e.g. plastic clips DisposalDisposing of the Packaging Material Disposal of old appliancesEconomical and Ecological Dishwashing Appliance Features and Control Panel Multi-Display can display Control PanelHardness range of the water in your area Prior to using for the first timeAdjusting the Water Softener Special saltTurning it anticlockwise Filling with Special Salt for the Water SoftenerFill with special salt Use special salt Open the door, remove the lower RackOperating Instructions Fill with rinse aid Filling with Rinse AidThat you glasses are clear Would damage the applianceSetting the Signal Tone for the End of the Wash Pro- gramme Adjusting Rinse Aid DosingFor washing in the dishwasher the following cutlery/dishes Daily UseLoading cutlery and dishes Not be washed in the dishwasherLoading Cutlery To avoid damage to glasses, they must not touchDo not lay small objects e.g. lids in the cutlery rack Work surface If you use the grid insert, it is notTo ensure that the cutlery basket Both parts of the two part handleLoad large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans Large PlatesLoading Cups, Glasses and Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Type Lowering the Upper BasketFill with detergent Filling with DetergentAutomatic Wash Programmes Bio Wash Programmes and Concentrated DetergentsSelecting the Wash Programme Programme Table Soiling SuitableSequence Starting the Wash Programme GrammeChanging the wash programme Pause Function Setting or Changing the Start Delay TimerCancelling the wash programme Setting the start delay timerEmptying the Dishwasher Switching Off the DishwasherChanging the start delay Load Sensing Sensor LogicCleaning the Filter Care and CleaningUnder no circumstances may Fault messages are displayed What to do, whenMalfunction Possible Cause Remedy Open the door carefully Wrong wash programme was selected There are problems with the operation of the dish- washerWash result is not satisfactory Dishes are still dirtyDecrease rinse aid dosing Drain hose is incorrectly laidDishes are wet and dull Rinse aid was not used Rinse aid container is emptyDishwasher Free-Standing Appliances Dishwashers that Can Be Integrated, Built-In DishwashersDishwashers that Can Be Fully Integrated Sample loading arrangements Upper basket without cutlery trayLower basket with cutlery basket Cutlery basket Installing the Dishwasher Installation and Connection InstructionsDishwashers That Can Be Integrated Built-In DishwasherFree-Standing Appliances Fitted with a décor panel to match Plinth on free-standing appliances is not adjustableWork surface must be re-mounted Free-standing appliances can beConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureSink outlet connection Water drainDrain hose Extension hosesLeak Prevention System Electrical connectionAppliance is automatically pumped out Connections Croatia New Zealand E. Abu Dhabi Jordan MaltaEgypt Kanada Mauritius Australia Korea South NamibiaIsrael Malaysia Saudi Arabia Cyprus Lebanon OmanEstonia Latavia Poland Hongkong Lthuania RussiaOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandService AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

80850 I specifications

The AEG 80850 I is an innovative and powerful kitchen appliance that brings efficiency and versatility to meal preparation. Designed with modern home cooks in mind, this induction hob stands out for its sleek design, user-friendly features, and advanced cooking technologies.

One of the main features of the AEG 80850 I is its induction cooking technology. Induction hobs use electromagnetic fields to directly heat the cookware, providing rapid heating and precise temperature control. This not only reduces cooking times but also enhances energy efficiency, as the heat is focused directly on the pan rather than the surrounding area. The result is a quicker and more economical cooking experience.

The AEG 80850 I offers a spacious cooking surface, accommodating multiple pots and pans simultaneously. With several cooking zones of varying sizes, users can easily tailor their cooking setup to suit different meals. The hob includes features like a large diameter zone for larger cookware, ensuring optimal use of the available space.

In addition, the AEG 80850 I features a boost function for each cooking zone. This allows for an intense burst of heat, ideal for boiling water quickly or searing meat at high temperatures. Once the desired temperature is reached, the hob automatically adjusts back to the selected cooking level, promoting convenience and preventing overcooking.

Safety is a priority with the AEG 80850 I. The appliance is equipped with features such as a child lock, ensuring that the hob cannot be accidentally turned on by young children. Moreover, the residual heat indicators provide a visual cue when a cooking zone is still hot, reducing the risk of burns.

The design of the AEG 80850 I is both modern and functional. The flat surface is easy to clean, as spills do not get trapped beneath burners. Its minimalist aesthetic makes it a stylish addition to any kitchen.

Moreover, the AEG 80850 I features a touch control panel for easy operation. Users can seamlessly adjust settings and temperatures with intuitive controls, allowing for a stress-free cooking experience.

Overall, the AEG 80850 I is a sophisticated induction hob that combines cutting-edge technology with stylish design and user-friendly features. Its rapid heating capability, safety features, and easy cleaning make it a must-have for any contemporary kitchen. Whether you are a novice cook or a seasoned chef, this induction hob is designed to enhance your cooking experience and deliver delicious results.
Top Page Image Contents