AEG 50730 manual Control panel, Which fault has occurred on the dishwasher, Ning

Page 9

Operating Instructions

Control panel

Water
softener	Function	Set start	Indicator for the
button	button	delay	start delay set	Multi-display

Wash programme Control

indicators

Door handle

ON / OFF button

buttons

Water softener and function button: In addition to the wash pro- grammes indicated, the dishwasher's water softening functions can be set and the control indicator for the rinse aid can be switched on/off by using a combination of these buttons.

The 3 multi-displaylights can indicate:

– the current stage of the wash programme selected.

–which fault has occurred on the dishwasher.

Control indicators have the following meaning:

:Top light

:Middle light

:Bottom light

	J	Refill with special salt
	H	Refill with rinse aid

3	The control indicators never light up while a wash programme is run-
	ning.

Image 9

Contents Favorit Dear customer Tips on using the appliancePlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Installation, Connection and Placing into Operation Safety InstructionsChild Safety General Safety Correct Use Economical and Ecological Dishwashing DisposalDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Which fault has occurred on the dishwasher Control panelNing Adjust the water softener Prior to using for the first timeYour area PanelManual setting Dishwasher must be switched offElectronic setting Ing the appropriate buttonFill with dishwasher salt Filling with Salt for the Water SoftenerRemain illuminated Open the door, remove the lower Basket Turning it anticlockwiseTo switch off the control indicator for rinse aid Rinse aidRinse aid can be added in one of two ways Fully open the rinse aid compartment lid Filling with rinse aidAdjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesNot be washed in the dishwasher Loading Cutlery Folded over to the left Loading Pans, Frying Pans Large PlatesTo ease the loading of large items Two right-hand plate insertsAcross one another Folded across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses and Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Fill with detergent Filling with DetergentGeneral Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentSoiling Selecting the Wash Programme Programme TableInterrupting or ending the wash programme Start the wash programmeWasher Open the door carefullySetting the delay start timer Setting or changing the delay start timerChanging the delay start timer Pause functionSwitching Off the Dishwasher Care and CleaningSive cleaners Emptying the DishwasherCleaning the Filter What to do, if Fault warnings are displayedWash results are unsatisfactory There are problems operating the dishwasherDishes are still dirty Dishes are wet and dullTechnical Data Decrease rinse aid dosingThere are dried water drops on the glasses and dishes Upper basket Lower basket with cutlery basket Sample loading arrangementsSee enclosed installation instructions Installing the DishwasherBuilt-Under Dishwasher Free-Standing AppliancesWork surface must be re-mounted Plinth on free-standing appliances is not adjustableWater Connection Connecting the DishwasherPermitted water pressure Connect the inlet hosePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

Control panel

–which fault has occurred on the dishwasher.

Control indicators have the following meaning:

ning.