Disposal of old Appliances
For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of its service life - to your new appliance as well.
Warning! Before disposing of old appliances make them inoperable. Remove plug from mains, sever the power cable, remove or destroy any snap or latch closures, to prevent small children being trapped inside.
• Use an authorised disposal site.
Contact your Local Council or Environmental Health Office to see if there are facilities in your area to recycle the appliance.
Remove transport packaging
Fix cover (C) on guide (A) until it clips into place.
A
C
PR33
The appliance and the interior fittings are protected for transport.
•Remove all adhesive tape and packing pieces from the interior of the appliance.
Description of the appliance
|
| A - | Dairy compartment | |
D | A | B - Can storage shelves | ||
C - Bottle storage shelf | ||||
| ||||
|
| D - Thermostat control | ||
E | B | E - | Glass shelves | |
| F - | Glass shelf | ||
|
| |||
F |
| G - Salad drawers | ||
| H - Compartment for | |||
|
| |||
G |
|
| storing frozen food | |
| C |
| ||
| I - | Compartment for | ||
|
| |||
freezing fresh food
H
I
Open the appliance door and the fur- niture door at 90°. Insert the small square (B) into guide (A). Put togeth- er the appliance door and the furni- ture door and mark the holes as indi- cated in the figure. Remove the squares and drill holes with ø 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.
At the end of installation/adjusting, it is necessary to check if the door of the furniture closes properly.
Should adjustment of the furniture door be necessary, use the clearance of slots.
8mm |
A |
B |
PR167 |
PR168 |
6 | 23 |