Fast heat up function, Display, Buttons | AEG BP5003001 instruction

	Daily use
	Daily use	11


Oven function	Application

Pyro Cleaning	For automatic pyrolytic cleaning of the oven. It burns off
	residual dirt in the oven. The oven heats up to approxi-
	mately 500°C.

Fast heat up function

The fast heat up function decreases the heat up time.

1.Set the fast heat up function. Refer to Oven function table.

2. Turn the temperature control knob	/	to set a temperature.

3.An acoustic signal sounds when the appliance is at the set temperature.

The fast heat up function does not deactivate after the acoustic signal. You must deactivate the function manually.

4.Set an oven function.

1Timer

2Heating Up / Residual heat indicator

3Water tank (selected models only)

4Core temperature sensor (selected models only)

5Door lock (selected models only)

6hr / min

7Clock functions

Button		Function	Description

		CLOCK	To set the clock function.
		CLOCK	To set the clock function.


	,	MINUS, PLUS	To set a value for time
	,	MINUS, PLUS	To set a value for time

		MINUTE MINDER	To set the minute minder. To switch ON/OFF
			light in oven cavity, hold button more than 3
			seconds
		TEMPERATURE	To check temperature inside the oven cavity.
			To check the Core Temperature Sensor tem-
			perature, when is connected (if applicable).
			Use only when the oven function is set.

If you activate an oven function, the bars in the display come on one by one. The bars show that the oven temperature increases or decrease.