Care and cleaning |
|
15 | |
|
|
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
WARNING!
The sharp objects and abrasive cleaning agents can cause damage to the appliance.
For your safety, do not clean the appliance with steam cleaners or
Scratches or dark stains on the
To remove the dirt:
1.– Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass . Put the scraper on the glass surface at an acute angle and move the blade on the surface .
–Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic or stainless steel.
2.Clean the appliance with a moist cloth and some detergent.
3.At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF…
Problem |
|
| Possible cause and remedy | |
|
|
| ||
You cannot activate the appli- |
| • Activate the appliance again and set the heat setting in 10 | ||
ance or operate it. |
|
| seconds. |
|
|
| • | You touched 2 or more sensor fields at the same time. Only | |
|
|
| touch one sensor field. |
|
|
| • | The Child Safety Device or the Lock or Stop+Go operates. See | |
|
|
| the chapter Operating instructions. | |
|
| • | There is water or fat stains on the control panel. Clean the | |
|
|
| control panel. |
|
|
|
| ||
A Sound operates and the ap- |
| You put something on one or more sensor fields. Remove the ob- | ||
pliance deactivates. |
| ject from the sensor fields. |
| |
A sound operates when the ap- |
|
|
|
|
pliance is deactivated. |
|
|
|
|
The appliance deactivates. |
| You put something on the | . Remove the object from the sen- | |
|
| sor field. |
| |
The residual heat indicator does |
| The cooking zone is not hot because it operated only for a short | ||
not comes on. |
| time. If the cooking zone should be hot, speak to the service cen- | ||
|
| tre. |
| |
|
|
|
|
|