Installation instructions |
|
5 | |
|
|
•Do not let cookware boil dry to prevent the damage to cookware and glass .
•Do not use the cooking zones with empty cookware or without cookware.
•Do not put the aluminium foil on the appliance.
•Make sure that the airflow space of 5 mm between the worktop and front of the unit below it stays opened.
WARNING!
If there is a crack on the surface, disconnect power supply to prevent the electrical shock.
INSTALLATION INSTRUCTIONS
Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The rating plate of the appliance is on its lower casing.
HK854220IB | 949 595 028 00 |
58 GBD C2 AU
7,4 kW
AEG
The Safety Instructions
WARNING!
You must read these!
•Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.
•Only an authorized servicing technician can install, connect or repair this appliance. Use only original spare parts.
•Only use the
•Do not change the specifications or change this product. Risk of injury and damage to the appliance.
•Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!
•Keep the minimum distances to other appliances and units!
•Install shock protection, for example install the drawers only with a protective floor di- rectly below the appliance!
•Keep safe the cut surfaces of the worktop from moisture with a correct sealant!
•Seal the appliance to the work top with no space between with a correct sealant!
•Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher or oven!
•Do not install the appliance adjacent to doors and below windows! If not, when you open the doors or windows they can push off hot cookware from the appliance.