AEG CGA 75 WOK Cleaning, Enameled Burner Caps, Stainless Steel, Burners and racks, Gas taps

Page 5

C -Cleaning

WARNING:

Before any operation, disconnect the appliance from the electric grid.

Do not clean the appliance while it is hot.

Enameled Burner Caps

The enameled burner caps must be washed with a sponge and soapy water or with a light detergent.

WARNING:

Do not use abrasive or corrosive products.

Do not leave substances, such as lemon or tomato juice, salt water, vinegar, coffee and milk on the enameled surfaces for a long time.

Stainless Steel

The stainless steel parts should also be cleaned with soapy water and then dried with a soft cloth.

WARNING:

Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive detergents for an extended period of time.

Stainless Steel can also discolour if in contact with excessive heat.

Burners and racks

These parts can be removed to make cleaning easier.

The burners must be washed with a sponge and soapy water or with a light detergent, wiped well and placed in their housing perfectly.

After cleaning, check that the feeler of the safety valve, start-up electrode and the flame-dividing ducts are not clogged with soap or grime.

The racks can be washed in the dishwasher.

Gas taps

WARNING:

Lubrication of the gas taps must be carried out by specialized personnel, exclusively.

In case of hardening or malfunctions in the gas taps, apply to the Customer Service.

5

Image 5
Contents Gas Cooktop Contents EEC 73/23 e 93/68 Low Voltage EEC 89/109 Contact with foods Installation check and warningsBurners Cooking InstructionsEnameled Burner Caps CleaningStainless Steel Burners and racksModel Installation & WarningsFastening the top Gas ConnectionMaintenance GAS Transformations and Adjustments10/A Technical Characteristics Table Technical DiagramsPower MJ/h Power Btu/h Rapid burner Oakville, Ontario Canada L6H5V1 WarrantyAEG