Bosch Appliances MUM8 Operating Appliance, Stirrer Whisk Kneading Hook, Preparation

en

Operating

the

appliance

Stirrer,

whisk,

kneading

hook

￿ Attention!

Stirrer

(7)

Do not operate the appliance &ithout an

for stirring dough, e.g. cake mixture

accessory/tool in the operating position.

Whisk

(8)

For reasons

of

safety the appliance

may

only

whites,

cream

and

light

for whisking egg

be operated &hen unused drives have been dough, e.g. sponge mixture

covered

&ith

drive guards (11,

12,

13).

notKneading hook

(9)

Do not

operate

the

appliance

empty. Do

expose

appliance

or

accessories to

heat

for kneading heavy dough

and

for folding

in

ingredients which

are not

to

be

cut

(e.g.

raisin

sources.

￿Before using the appliance and accessorieschocolate chips)

for the first

time, clean

them thoroughly, s

￿

Risk

of injury

from

￿

•Cleaning and servicing".

rot￿ting tools

Preparation

￿hile the appliance is running, keep hands

￿

clear of the bo&l. Attach the cover (4) before

Place the base unit on a smooth and clean

￿

worktop.

Fig.

3

operating

the

appliance!

the drive

has come

Pull out the

Do

not

change

tools until

power cord

( ).

If the appliance features

an automatic

cord to

a standstill

)

&hen

the

appliance

is

winder:

s&itched

off,

the

drive

continues running

￿Pull out the cord in one go to the requiredbriefly and stops in the tool change position.

length (max. 110 cm) and slowly	release; Do not	move the s&ivel arm until the tool ha
the cord is locked.	come to	a standstill.

￿Reducing the cord length:For reasons of safety the appliance may only

Pull

gently

on the

cord

and allow

it to roll

up to the required length.

Then

gently

be operated &hen unused drives have been

covered

&ith

drive

guards

(11,

12,

13).

pull￿the cord again and

slowly release;

Working

with

the

bowl

and

the

tools

Fig.

the￿cable

is

locked.

￿ Re5insert

the

mains

plug.

￿

Press the Release button(1) and move the

￿ Attention!

swivel

arm

to

position

6.

Depending

on

the

processing

task, insert

the

Do

not

t&ist

the cord

&hen

inserting

it.

￿

stirrer,

whisk

or kneading

hook until

it

locks

If

the appliance

features

an

automatic

cord

into position.

&inder,

do

not

insert

the

cord

manually.

&ay Note:

If￿the￿cord

jams,

pull

out

the

cord all

the

hook(9),

and then

allo&

it to

&ind up.

After engaging

the kneading

press￿the cover over the drive(Fig. 10).

Setting

the

operating

position

Fig.

4

Insert

the

bowl:

￿

￿ Press the Release button(1)

and move

the

- Tilt

the

bowl

forwards and

then set

it

dow

swivel

arm.

- Rotate

the

bowl

as

far

as

possible

in

an

￿ Move the swivel arm until

it

engages in

the anti5clockwise

direction

required

position.

Note:

Selecting

the

setting

Fig.

5

The recess in the bowl must fit into the

moulded

part

on

the base Figunit. 6a( ).

￿ Rotate the switch(3) to the

required

setting. ￿

Put the

ingredients to

be

processed

into

0/off

= Stop/Off

the￿bowl.

M

= Pulse

switch

￿

Press

the

Release

button(1)

and

move

the

Hold

rotary

switch.

swivel

arm

to

position

1.

The￿drive

operates

at

￿

Attach

the

cover.

maximum

speed.

￿

Move

the

rotary switch

to the

required

Settings

1-4

= Operating

speed

setting.

(1 = slow, 4 = fast)

Intermediate

settings

are￿indicated.

10