Programming
Setting {DOOR KEY} button
When a separate door opener is connected to the main monitor station, you can open the door using the main monitor station. You can also select how long the door remains open. If you do not use the door opener, select “NOT CONNECTED”.
LThe default setting is “5 SEC OPEN”.
{MONITOR}
{MENU}
{TALK/OFF}
1 Press {MENU}, then select “CONNECTED DEVICE SETTINGS” by pressing {MENU} (▲SELECT).
FUNCTION SETTINGS
TIME AND DATE SETTINGS RING/ANSWERING SETTINGS RECORDING/PLAY SETTINGS CONNECTED DEVICE SETTINGS
2 Press {MONITOR} (OK), then select “DOOR KEY” by pressing {MENU} (▲SELECT).
CONNECTED DEVICE SETTINGS
DOOR STATION CONNECTION LOBBY CONNECTION
DOOR KEY
3 Press {MONITOR} (OK), then select the door opener to be set by pressing {MENU} (▲SELECT).
DOOR KEY
DOOR KEY 1
DOOR KEY 2
4 Press {MONITOR} (OK), then select the desired item by pressing {MENU} (▲SELECT).
5 Press {MONITOR} (OK).
L“r” moves to the selected item.
6 To end the operation, press {TALK/OFF}.
Note:
|
|
|
| DOOR KEY 1 | |
|
| 2 | SEC OPEN | ||
|
| 3 | SEC OPEN | ||
|
| 4 | SEC OPEN | ||
|
| ● | 5 SEC OPEN |
| |
|
|
| |||
|
|
| 6 | SEC OPEN |
|
Current |
|
| |||
7 SEC OPEN | |||||
setting | NOT CONNECTED | ||||
LAfter setting the {DOOR KEY} button, confirm that the door can be properly locked/unlocked depending on the status of the door opener. If needed, change the time how long the door remains open by performing the steps above again.
20
