Sanyo DSR-2108 instruction manual Setting the Network, BDDNS settings, BNetwork settings

Remote Setup

I

Setting the Network

To set information about the DVR network.

The DVR will be forcibly restarted if a value on this screen is changed.

bDDNS settings

When using Sanyo's DDNS service, select "SANYO" and input the registered domain name.

bNetwork settings

23

1

4

1Port

When connecting multiple DVRs to the network, set a unique port number to each DVR.

2Client Access

To operate via network, make sure the checkbox is checked.

3Band Width Saving

To limit the network bandwidth, check the checkbox.

4Address settings

Input necessary information depending on the selected [Network Type].

•If "LAN" is selected:

The address setting mode is manual.

Input IP, Gateway, Subnet Mask, and DNS Server IP.

•If "DHCP" is selected:

The address setting mode is automatic.

Addresses and other information do not need to be set.

Memo: • Refer to P45 for details on how to register the domain name.

•When using other company's DDNS service, contact the dealership where this unit was purchased or a "Repair Service Center".

•If "ADSL" is selected:

Input the login ID and Password.

74