Sanyo DSR-2108 Connecting to this unit, BConnecting for the first time, Disconnecting

Connecting to this unit

To start this software, double-click the desktop shortcut icon ( ), the main screen is displayed. When connecting a camera to this unit following the procedure below, the camera live video is displayed.

bConnecting for the first time

1Click the connect button on the operation panel.

The connection dialog [Connect] is displayed.

☞In DSR-2108, the multi-screen switch button displays a multi-8 screen.

2Input information such as the address information and settings required for the connection.

•Site Name:

Set up an administrative designation for this unit.

•IP Address/Port No.:

Input the IP address and PORT number set on the NETWORK screen of this unit.

When using DDNS, input the set domain name into "IP Address".

Apart from the port that has been set (e.g., 5445), the port number plus 1 (e.g., 5446) and the port number plus 10 (e.g., 5455) are used.

•Protocol:

Select the protocol (TCP/UDP).

•Password:

Input the network password set on the SYSTEM screen of this unit.

This unit cannot be connected to the network if the [CLIENT ACCESS] on the NETWORK screen is not set to "ON". (P42)

3Click [OK] on the dialog [Connect].

The camera connects to this unit and the live video of the camera is displayed on the main screen.

bDisconnecting

Once connected, the connect button on the operation panel changes to the disconnect button.

Clicking this button disconnects the connection with this unit and the displayed video disappears.

☞In DSR-2108, the multi-screen switch button displays a multi-8 screen.

bWhen there are several connections

The connection information used with this unit is displayed at once under the site name in the "---SelectSite---" pull down menu.

To change the connection destination, select Site Name in the pull down menu and click. The present connection is disconnected and the specified site is automatically connected.

Memo: • To change the connection destination using the connection button, disconnect the present connection using the disconnect button and perform the connection operations again.

•Editing of the registered connection information such as additions changes or deletions may be performed under "Site" in the set up menu.

52